Welcome to ManualsDock! Read Millions of manuals for free.

BELLA 4 Slice Long Slot Toaster Instruction Manual

BELLA FEATURED

Bella LOGO

BELLA 4 Slice Long Slot Toaster

BELLA 4 Slice Long Slot Toaster

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. READ ALL INSTRUCTIONS.
  2. Do not touch hot surfaces. Use handles or knobs.
  3. To protect against electrical shock do not immerse cords, plugs, or appliances in water or other liquid.
  4. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  5. Close supervision is necessary when any appliance is used by or near children.
  6. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
  7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest store for examination, repair, or adjustment.
  8. The use of accessory attachments not recommended by the appliancemanufacturer may cause injuries.
  9. Do not use outdoors.
  10. Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
  11. Do not place on or near a hot gas or electric burner, or in a heated oven.
  12. To disconnect, press the CANCEL button, then remove the plug from the wall outlet.
  13. Do not use the appliance for other than intended use.
  14. Oversize foods, metal foil packages, or utensils must not be inserted in a Toaster as they may involve a risk of fire or electric shock.
  15. A fire may occur if Toasters are covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation.
  16. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
  17. Countertop use only.

ADDITIONAL IMPORTANT SAFEGUARDS

CAUTION HOT SURFACES: This appliance generates heat and escapes steam during use. Proper precautions must be taken to prevent the risk of burns, fires, or other injury to persons or property damage.

  1. A person who has not read and understood all operating, toasting, and safety Instructions is not qualified to operate this appliance. All users of this appliance must read and understand this Instruction Manual before operating or cleaning this appliance.
  2. If this appliance falls or accidentally becomes immersed in water, unplug it from the wall outlet immediately. Do not reach into the water!
  3. When using this appliance, provide adequate air space above and on all sides for air circulation. Do not operate this appliance while it is touching or near curtains, wall coverings, clothing, dishtowels, or other flammable materials.
  4. To reduce the risk of fire, do not leave this appliance unattended during use.
  5. If this appliance begins to malfunction during use, press the CANCEL button and unplug the cord. Do not use or attempt to repair a malfunctioning appliance!
  6. The cord to this appliance should only be plugged directly into a 120 V AC electrical wall outlet.
  7. Do not use this appliance in an unstable position.
  8. Use the Toaster on a hard, flat surface. Do not place it near a flame or heat or on a soft surface (such as carpet). Avoid placing it where it may tip over during use. Dropping the Toaster could cause it to malfunction.
  9. Do not operate unattended
  10. When heating toaster pastries, always use the lightest toast color setting.

CAUTION:

  • DO NOT toast pastries with runny fillings or frosting.
  • DO NOT toast torn slices of bread.
  • DO NOT place buttered bread or wrapped food into the Toaster.
  • DO NOT toast small-size breads, mini-baguettes, breadsticks, etc.

Notes on the Plug
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

Notes on the Cord
The provided short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Always plug directly into a wall outlet/receptacle.

  1. The marked electrical rating of the cord set, or extension cord should be at least as great as the electrical rating of the appliance.
  2. The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and
  3. If the appliance is of the grounded type, the cord set or extension cord should be a grounding-type 3-wire cord.

Electric Power
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.

Getting To Know Your Toaster 

BELLA 4 Slice Long Slot Toaster 1

Before Using For The First Time

  1. Remove all packaging materials including those that may be inside the toasting slots or toasting lever slot.
  2. Wipe the stainless-steel exterior with a damp cloth. Dry thoroughly. Do not use abrasive cleaners.
  3. Do not put the toaster, cord or plug in water.
  4. Make sure both the crumb tray is locked in position on the bottom of the toaster and the toasting lever is in the UP position.
  5. Unwrap the power cord from the cord storage area on the underside of the toaster and plug it into a 120V AC outlet.
  6. Turn the browning control dials to (1), the lightest setting.
  7. Lower the toasting levers until they lock in place. It is recommended to run 2 cycles of toast without bread before the first use.

Toasting instructions

  1. Before toasting, make sure the crumb tray is in position on the bottom of the toaster and the toasting lever is in the UP position.
  2. Make sure no bread or other objects are inside the toasting slots. Place the toaster on a flat, level, heat-resistant surface.
  3. Remove all protective wrappings from food before placing them into the toasting slot(s).
    IMPORTANT:
    Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in toasting slot(s).
  4. Plug the power cord into a 120V AC electrical outlet.
  5. Insert bread or toaster food into 1 to 2 of the toasting slot(s). it can be inserted in four slices at most every time. Only the regular slice can be placed into the bread slot.
  6. Set the color control knob to your desired color. There is a 7-position level, the lowest is white and the highest is puce. The bread slice can be toasted to a golden color at the position of “4”.
  7. Lower the toasting lever until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. When the bread is lowered into position, the CANCEL button will illuminate, and toasting will begin.

Reheat Button

  1. Use the reheat to warm through toasted bread or any toaster food that has cooled.
    NOTE:
    This toaster has a special setting for reheating toast, which overrides the toaster’s browning setting.
    IMPORTANT:
    Use the REHEAT function with plain, unbuttered toast ONLY.
  2. Place bread into 1 to 2 of the toasting slots.
  3. Lower the toasting lever until locked into place. The automatic centering guides hold food upright for uniform side-to-side toasting. The CANCEL button will illuminate.
  4. Press the REHEAT button. Both the Cancel and reheat buttons will be illuminated; the cycle will begin.
  5. At the end of the REHEAT cycle, the toasting lever(s), reheated bread, or toaster food will rise automatically, and the toaster will turn OFF.
  6. Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still be hot.
    IMPORTANT:
    Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
  7. To interrupt the REHEAT cycle, press the illuminated CANCEL button.
  8. Unplug the cord from the wall outlet when not in use.

Defrost Button
Your Toaster can defrost bread and toast it in a single cycle.

  1. Place the frozen bread in the toaster.
  2. Set the browning control to the desired shade setting.
  3. Press the loading lever down. The CANCEL button will illuminate.
  4. Press the DEFROST button. Both Cancel and Defrost buttons will be illuminated; the cycle will begin.
  5. The loading lever will rise automatically when the toasting cycle is complete.
  6. Remove bread or toaster food from the toasting slot(s). Use care as the top of the toaster will still be hot.
    IMPORTANT:
    Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating
    element or cause injury.
  7. To interrupt the DEFROST cycle, press the illuminated CANCEL button.
  8. Unpthe lug cord from the wall outlet when not in use. Your Toaster can defrost bread and toast it in a single cycle.

Convenience Food Toasting
Many varieties of packaged convenience food are available today, both frozen and non-frozen (shelf pastry). Since toaster foods and individual tastes vary, it is difficult to recommend exact browning settings. However, after a little experimentation you will discover the best setting for your needs. You may also wish to refer to the heating instructions on convenience food packaging.

Important Points

  • Remove all protective wrappings from food before placing them into the toasting slot(s).
  • For best results, clean the crumb tray(s) frequently.
  • Different breads require different color settings. Press the illuminated CANCEL button at any time to check the toast color.
  • Do not block extra wide toasting slots. Never place any object over the top opening.
  • Do not toast buttered bread, buttered Texas toast, buttered English muffins, buttered bagels, or buttered pita bread. Melted butter will cause fire
  • When toasting more than 1 slice of bread, use slices of similar size, thickness, and freshness.
  • Stale bread, thin bread, or sweet bread products, such as tea cakes and fruit loaf, brown much more quickly than ordinary bread, so they should be trained in lighter settings.
  • Never impetuous toys toys cords, or plug in water or other liquid.
  • Never use a fork or sharp-edged utensil to remove toast, because that may damage the heating element or cause injury.
  • If the toaster starts to smoke, Press Cancel to stop toasting immediately.
  • Never attempt to remove bread jammed in the slots without unplugging the toaster from the electrical outlet first. Be sure not to damage the internal mechanism or heating elements when removing bread.

Care & Cleaning Instructions

CAUTION:
Do not immerse the toaster, or cord, or plug in water or any other liquid.
CAUTION:
Be sure the toaster is unplugged before cleaning.
CRUMB TRAY:
The crumb tray is located on the bottom of the toaster. Working over a sink or garbage receptacle, pull the crumb tray out of the back to remove it. Wipe the crumb tray with a clean, damp cloth. Push the crumb tray back into position. Make sure the crumb tray is locked securely into the bottom of the toaster.
EXTERIOR:
Wipe the toaster exterior after the toaster cools down with a clean, damp cloth. Do not use abrasive cleaners. Do not put a cord or plug in water or liquid.

Storing Instructions

  1. Unplug the unit, allow it to cool, and clean it before storing it.
  2. Store the toaster in its box in a clean, dry place.
  3. Never store the toaster while it is hot or still plugged in.
  4. Never wrap the cord tightly around the appliance; use the storage area at the bottom of the toaster.
  5. Do not put any stress on the cord where it enters the unit, as it could cause the cord to fray and break.

Limited TWO-YEAR Warranty

SENSIO Inc. hereby warrants that for TWO YEARS from the date of purchase,  this product will be free from mechanical defects in material and workmanship, and for 90 deaths concerning non-mechanical parts. At its sole discretion, SENSIO Inc. will eitherrepair or replace the product found to be defective or issue a refund on the product during the warranty period.

The warranty is only valid for the original retail purchaser from the date of the initial retail purchase and is not transferable. Keep the original sales receipt, as proof of purchase is required to obtain warranty validation. Retail stores selling this product do not have the right to alter, modify, or in any way revise the terms and conditions of the warranty.

EXCLUSIONS:
The warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use of the product, use of improper voltage or current, improper routine maintenance, use contrary to the operating instructions, disassembly, repair, or alteration by anyone other than qualified SENSIO Inc. personnel. Also, the warrant does not cover Acts of God such as fire, floods, hurricanes, or tornadoes.

SENSIO Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. Apart from the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in time to the duration of the warranty. Some states, provinces, or jurisdictions do not allow the exclusion or limitation of incidental or consequential damage, or limitations on how long an implied warranty lasts, and therefore, the above exclusions or limitations may not apply to you. The warranty covers specific legal rights which may vary by state, province,and/or jurisdiction.

HOW TO OBTAIN WARRANTY SERVICE:

You must contact Customer Service at our toll-free number: 1-866-832-4843. A Customer Service Representative will attempt to resolve warranty issues over the phone. If the Customer Service Representative is unable to resolve the problem, you will be provided with a case number and asked to return the product to SENSIO Inc.

Attach a tag to the product that includes: your name, address, daytime contact telephone number, case number, and description of the problem. Also, include a copy of the original sales receipt. Carefully package the tagged product with the sales receipt, and send it (with shipping and insurance prepaid) to SENSIO Inc.’s address. SENSIO Inc.shall bear no responsibility or liability for the returned product while in transit to SENSIO  Inc.’s Customer Service Center.

FOR MORE MANUALS BY BELLA, VISIT MANUALSDOCK

Leave a Comment