Sharper Image SI-428 Handheld Garment Steamer
About Sharper Image
Sharper Image is a well-known American brand that specializes in selling a wide variety of innovative and high-tech products. The company was founded in 1977 by Richard Thalheimer to offer unique and cutting-edge consumer products that cater to various aspects of modern living. The brand gained popularity for its upscale, high-quality gadgets, electronics, and lifestyle products.
Throughout its history, Sharper Image has offered products ranging from electronic gadgets, personal care items, home appliances, audio and video equipment, massage chairs, air purifiers, and much more. Many of their products incorporate advanced technology and design, often focusing on improving convenience, entertainment, and well-being.
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use, and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See sihomecomfort.com to view, download and print the most current version of these instructions.
INTENDED USE: This product is intended to be used indoors for garment steaming in the United States and/or Canada. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.
WARNING: Risk to Children and Impaired Persons
- Supervision is required during the installation, operation, cleaning, and maintenance of this product by children aged 12 and younger and anyone with reduced physical, sensory, or mental capabilities. Children should be supervised to ensure that they do not play with the appliance, its parts, and packaging material.
Directions to reduce the risk of fire, electrical shock, and injury:
- Read all instructions before use.
- Use caution when handling this steam unit. Burns could occur from touching hot metal parts, hot water, or steam. Use special care to avoid contact with hot water when turning the product upside down to empty the reservoir.
- To reduce the risk of contact with hot water, test whether steam is ready before each use while carefully holding the product away from your body. If no steam appears, wait a few more minutes and test again. Do not look into the appliance, use your hands or other objects to check for steam.
- Do not leave the appliance unattended while connected.
- To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
- Always disconnect appliances from electrical outlets when filling with water or emptying, and when not in use.
- Do not allow the cord to touch hot surfaces. Let the appliance cool completely before putting away. Loop the cord loosely around the appliance when storing.
- Never yank the cord to disconnect from the outlet. Instead, grasp just the plug and pull to disconnect.
- Do not operate the appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance. All repairs must be performed by a qualified service professional. Incorrect reassembly or
repair could cause a risk of fire, electric shock, or injury when the appliance is used. - A loose fit between the wall outlet (receptacle) and the plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
- To reduce the likelihood of circuit overload, do not operate another high-wattage appliance on the same circuit.
- If an extension cord is necessary, a 15 amp-rated cord should be used. Cords rated for less amperage may overheat. Care should be
taken to arrange the cord so that the cord cannot be pulled or tripped over. - This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
FCC CONSUMER ADVISEMENT: This equipment may generate, use, and/ or radiate radio frequency energy that may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact (833.800.8669) or (help@sihomecomfort.com) for further instructions about replacement and repair.
Please refer to our website for the most current version of our owner’s guide.
PRODUCT INFORMATION
The following features are included with your Handheld Fabric Steamer. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, contact (833.800.8669) or (help@sihomecomfort.com).
- The Steam Nozzle emits the flow of hot, penetrating steam produced by the Reservoir.
- The Water Reservoir Cap is designed to safely contain steam inside the Reservoir while providing easy access to the Reservoir’s fill hole.
- The Reservoir Level Window permits a clear view of the water level inside the Reservoir and is marked to indicate the maximum water level for easy filling.
- The Reservoir is the internal reservoir where water is held and converted into steam. For optimal steam production, the Reservoir should not be filled past the MAX mark (4.0 oz. / 118 ml.) indicated on the Reservoir Level Window.
- The On/Off Switch powers the unit On and Off. The unit is ON when the button is lit orange.
- The Handle is designed to stay cool while providing maximum grip and comfort.
FILLING RESERVOIR
- Place Handheld Fabric Steamer on a flat, level surface.
- Make sure the power cord is unplugged from the electrical outlet.
CAUTION: If the unit has been in use, allow Reservoir to cool (5 minutes for minimum cooling before removing Water Reservoir Cap and adding water).
- Remove Water Reservoir Cap by turning it clockwise.
- Carefully fill the Reservoir with water from a faucet, bottle, or cup. Use Reservoir Level Window to gauge the water level, stopping when it reaches the MAX mark.
WARNING: MAX mark on Reservoir Level Window represents the unit’s maximum usable water capacity (4.0 oz. / 118 ml.). Exceeding this amount will result in water spitting from Steam Nozzle.
NOTE: To minimize potential mineral build-up and prolong the life of your Handheld Fabric Steamer, distilled or de-mineralized water is recommended when filling Reservoir.
- Replace Water Reservoir Cap by turning counterclockwise until the arrows are aligned.
CAUTION: IF THE UNIT TIPS OVER WHILE TURNED ON AND PRODUCING STEAM, IT WILL CONTINUE TO PRODUCE STEAM. USE CAUTION WHEN PICKING THE UNIT UP.
FABRIC STEAMING
CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive materials.
NOTE: Be sure the Reservoir has already been filled before following these steps
- Plug the power cord into a standard electrical outlet.
- After approximately 1 minute, steam will begin emitting from Steam Nozzle.
- Direct the Steam Nozzle toward the fabric material you wish to steam. See below for additional tips and procedures.
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away from yourself, other people, pets, and plants) when steaming.
STEAMING GARMENTS
- Hang the garment from a clean, rust-free hanger.
- Direct Steam Nozzle towards the bottom of the garment. Steam will rise along the inside and outside of the material, removing wrinkles. Slowly slide Steam Nozzle upward from the bottom to the top of the garment.
- Direct the Steam Nozzle away from the garment and smooth the material with your free hand.
- Repeat as necessary until the garment is fresh and wrinkle-free.
GENERAL STEAMING TIPS
- For the most effective results, hold Steam Nozzle within 1/2 inch of fabric, or press it directly against surfaces.
- Curtains and draperies can be steamed while still hanging.
- To remove wrinkles from towels, handkerchiefs, and napkins, drape them over a rod or towel rack and gently steam them.
- Heavier fabrics may require repeated steaming to achieve desired results.
- To remove exceptionally stubborn wrinkles, steam both sides of the fabric.
- Be especially careful when steaming any delicate fabrics that may be damaged by heat or water spots.
- To sanitize a fabric, hold Steam Nozzle within 1/2 inch of a single area for at least 5 seconds. Use caution when doing this on more delicate fabrics.
When you are finished using your Handheld Fabric Steamer, immediately unplug the power cord from the electrical outlet. Refer to Storage & Care guidelines on Page 12 of this manual for proper storage and maintenance procedures.
STORAGE & CARE
PROPER STORAGE
- Preparing your Handheld Fabric Steamer for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below.
- Unplug the power cord from the electrical outlet.
- Allow the unit to cool (15 minutes for complete cooling).
- Remove Water Reservoir Cap. Drain any water remaining in Reservoir into a sink or tub, then add 1 oz. water. Shake to release mineral buildup and empty the tank to minimize potential mineral build-up. Replace Water Reservoir Cap.
- Bundle the power cord loosely.
- Store Handheld Fabric Steamer in a cool, dry location.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of build-up caused by high mineral content in many municipal water supplies. This mineral build-up may cause the unit to spew water, limit its effectiveness and reduce the life of your Handheld Fabric Steamer.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when using your Handheld Fabric Steamer. In addition, it is recommended that the Reservoir be cleaned at least once a month to remove any deposits that form. This will help to extend the life of your Handheld Fabric Steamer and keep it functioning at its maximum potential.
MAINTENANCE
After EACH USE, allow the unit to cool, and add 1 oz. water, shake to release mineral buildup and empty the tank.
TO REMOVE MINERAL BUILD-UP
- Unplug the power cord from the electrical outlet.
IMPORTANT: The unit should remain unplugged during the cleaning procedure. - Allow the unit to cool (15 minutes for complete cooling).
- Remove Water Reservoir Cap and drain any water remaining in Reservoir into a sink or tub.
- Using a measuring cup, measure 4 oz. (118 ml.) of vinegar.
- Slowly pour vinegar into Reservoir.
- Allow the vinegar to soak in Reservoir for 30-40 minutes.
- Drain vinegar from Reservoir into a sink or tub. Refill the Reservoir with fresh water, drain, and repeat until the vinegar odor dissipates.
- Replace Water Reservoir Cap.
- Bundle the power cord loosely and store Handheld Fabric Steamer in a cool, dry location.
TROUBLESHOOTING
WARRANTY
If you’re not satisfied with this product, let us know
Vornado Air, LLC warrants to the original consumer or purchaser that this Sharper Image® Steam Product (“Product”) is free from defects in material or workmanship for one (1) year from the date of purchase. If any such defect is discovered within the warranty period, Vornado, at its discretion, will repair or replace the Product at no cost.
For warranty or repair service: Call 833-800-8669 or email help@sihomecomfort.com to obtain a Return Authorization (“RA”) form. Please have or include your Product’s model number and serial number, as well as your name, address, city, state, zip code, and phone number when contacting Vornado for warranty service.
After receiving the RA form, ship your Product to Vornado Air LLC Attn: Warranty & Repair 415 East 13th Street Andover, KS 67002. For your convenience, please have your model number and serial number when contacting Vornado with service inquiries. To assure proper handling, packages must be marked with the RA number. Packages not marked with the RA number may be refused at the receiving dock. Please allow 1-2 weeks for repair and return of your Product after the Product is received.
Repairs not covered by the warranty or outside the warranty period will require a fee to cover the cost of materials, labor, handling, and shipping.
This warranty does not apply to defects resulting from abuse of the Product, modification, alteration, mishandling, improper maintenance, commercial use, or repair or service of the Product by anyone other than Vornado; damages which occur in shipment or are attributed to acts of God. Improper product use, which includes using an external device that alters or converts the voltage or frequency of electricity, or shipping a Vornado product to a country not intended for use will void all warranties.
Any unauthorized product modification, repair by an unauthorized repair center, or use of non-approved replacement parts is not recommended and any consequences will not be covered by support services or product warranties. The product warranty will be honored only on models that are being used in the country intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.
The manufacturer assumes no responsibility for damage caused by failure to follow these instructions or improper product use. Any such actions will invalidate the product warranty.
All company names and product names are trademarks of their respective owners. © All rights reserved. All technical information, data, and instructions for the installation, connection, and operation contained in these instructions for use correspond to the latest available information at the time of printing. The contents of this manual may differ slightly from the actual product. Observe any additional supplements.
©2019 Vornado Air LLC, Andover, Kansas 67002 USA.
Specifications are subject to change without notice.
Sharper Image® name and logo are registered trademarks.
Manufactured, marketed, and distributed under license by Vornado Air LLC, Andover, Kansas 67002.
Manufactured in China.
U.S. Patents Pending.
Sharper Image® Distributed under license by Vornado Air LLC, Andover, Kansas 67002.
FAQS About Sharper Image SI-428 Handheld Garment Steamer
What advantages can a handheld steamer offer?
Using a clothes steamer to steam your clothes is essentially a non-contact, non-chemical procedure that helps protect materials. A clothes steamer can be a terrific way to refresh fabrics without harming the fibers if your clothing is unstained.
What function does a handheld steamer for clothing serve?
Start by lightly touching the steamer’s nozzle to your garment. There should be no wrinkles. The steam from the tool loosens the fabric it comes into touch with, which then allows the creases to be released. You don’t need to exert much pressure on the material.
What degree should a steamer for clothing be set at?
between 200 and 400 degrees
How frequently should a steamer be used?
Most skin types with less sensitive skin can steam two to three times each week. According to Diliberto, oily skin is typically thicker and can withstand more frequent steaming. If you have thinner or drier skin, once per week is plenty.
Are clothing cleaned by garment steamers?
Get this: Salmonella, listeria, and E. coli can all be successfully eliminated by steam cleaning. If the heat level hovers around 200 degrees, steaming is the safest technique of washing garments because it just uses the power of heat and water. Your clothing may become burned if it becomes too hot.
Can I steam my clothes while I sleep?
It is safe to steam most furniture, mattresses, box springs, textiles, and flooring. Before using steam to get rid of the bugs, check labels or contact the manufacturer. For bedbugs to be killed, the surface temperature needs to be between 160°F and 180°F.
Do clothing steamers eliminate stains?
Stains that are extremely difficult to remove can be removed with a clothes steamer. Pre-treat the stain in the most efficient manner before to utilizing your steam cleaner, depending on what caused it. After pre-treating the stain, point your steam cleaner straight at it for around 30 seconds.
Do portable steamers actually iron clothes?
In general, a steamer can never completely replace an iron. Denim, organza, and heavy cotton fabrics will all still require the use of an iron to remove all creases. But now that some higher-end steamers have a hot plate, it’s easier than ever to eliminate those harsher wrinkles and add the necessary ones.
Do shirts respond well to handheld steamers?
“In testing, steamers were less effective than irons on stubborn folds and wrinkles, particularly on the hems of heavily creased shirts, jeans, and cotton sheets,” claims Jackie. “An iron is a better tool for keeping button-down shirts crisp if you wash and dry them at home.”
Is it simple to use a garment steamer?
A steamer is a quick, simple tool for eliminating wrinkles from drapes, upholstery, and slipcovers for furniture. The fabrics in your closet and house will look and smell nicer, whether you select a larger home model or a compact travel steamer.
For more manuals by Sharper Image, Visit Manualsdock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Sharper-Image-SI-428-Handheld-Garment-Steamer-User-Guide.pdf” download=”all”]