Welcome to ManualsDock! Read Millions of manuals for free.

Pyle PDWMU112 UHF Wireless Microphone System Kit User Manual

Pyle PDWMU112 UHF Wireless Microphone System Kit Featured

Pyle LOGO

Pyle PDWMU112 UHF Wireless Microphone System Kit

Pyle PDWMU112 UHF Wireless Microphone System Kit Product

About Pyle

Pyle is a well-known consumer electronics company that specializes in manufacturing a wide range of audio equipment and accessories. The company was founded in 1960 and is based in Brooklyn, New York. Pyle Audio has built a reputation for producing affordable and quality audio products, catering to various consumer needs.

Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won’t declare again, and we are not responsible for consequences caused by fault or oversight of this manual.

Instructions

Please read this manual carefully before using it and strictly operate and store it in accordance with the instructions. Please save it for your future reference.

The wireless system is reliable in performance, portable, and easy to operate, and is suitable for use at home, school, training room, and outdoor performance. The wireless system adopts advanced intelligent digital technology and highly integrated circuit design, which has the advantages of strong stability, intelligence, and high efficiency.

FEATURES

  1. UHF frequency for stronger anti-interference ability and stable transmission distance.
  2. The transmitter has a frequency modulation function to meet the simultaneous use of multiple frequencies.
  3. The receiver adopts an automatic frequency lock design, which makes operation simpler and smarter.
  4. Mini receiver design with 6.35mm standard audio plug, plug and play.
  5. The receiver has a rechargeable function, circuit protection technology, and a detachable large-capacity Lithium battery. It can also be connected to a power bank for Long-term offline use.
  6. Easy to operate, easy to use, and have a good sense of experience.

RECEIVER FUNCTION DESCRIPTION

Pyle PDWMU112 UHF Wireless Microphone System Kit (1)

  1. 6.35mm audio plug
  2. Power switch
  3. Power indicator, charging indicator
  4. DC 5V charging port
  5. RF signal indicator
  6. Antenna
  7. 18650 lithium battery negative electrode*
  8. 18650 lithium battery compartment
  9. 18650 lithium battery positive electrode*

Note: Be sure to confirm the positive/negative battery before installing it to avoid damage to the receiver! Please fully charge the lithium battery before using it.

TRANSMITTER FUNCTION DESCRIPTION

Handheld Microphone

Pyle PDWMU112 UHF Wireless Microphone System Kit (2)

  1. Microphone head
  2. LED display
  3. Microphone switch
  4. CH button
  5. Battery compartment
  6. Transmitter antenna
  7. Tail cover

BODYPACK TRANSMITTER

Pyle PDWMU112 UHF Wireless Microphone System Kit (3)

  1. Antenna
  2. Volume Adjust and ON/OFF button
  3. Microphone Connector
  4. CH Button DOWN
  5. CH Button UP
  6. LED Display
  7. Battery compartment Double AA batteries (AA 1.5VX2)
  8. Headset microphone (Lavalier microphone)

OPERATION

Tips: Under normal circumstances, the product has been completed at the factory, and can be used normally after opening the box, no need to adjust the frequency. If you need to adjust the frequency, please follow the steps below.

Note: Before operating, make sure the transmitter and receiver are both off.

The operation sequence of the handheld microphone:

  1. Press and hold the power button and CH button of the transmitter at the same time until the LED display flashes then release the button.
  2. Turn ON the receiver power button, please pay attention to the RF signal indicator of the receiver. Under normal circumstances, the receiver RF signal indicator flashes continuously for 4 times and then goes out. (In this case, the receiver and the transmitter are connected successfully.)
  3. Short press the transmitter CH button to confirm the connection between the transmitter and the receiver. At this time, the transmitter display stops flashing, and the receiver RF signal indicator is always ON, indicating that the receiver and the transmitter are connected successfully.

Note:

If it can’t be connected, please repeat the above operation. (The transmitter must be operated before the receiver is turned ON.)
When the same frequency interference occurs, please short-press the transmitter CH button. At this time, the transmitter will change the frequency to avoid frequency interference.

Bodypack Transmitter Operation Sequence

  1. The transmitter and receiver are both off.
  2. Press and hold ” the ” CH button and turn ON the power switch button to “ON” at the same time until the LED display flashes for 4 seconds, then release the ” ” CH button.
  3. Turn ON the receiver power button, pay attention to the RF signal indicator of the receiver. Under normal circumstances, the receiver RF signal indicator flashes continuously for 4 times and then goes out.
    (ln this case, the receiver and the transmitter are connected successfully)
  4. Short press the transmitter ” ” CH button to confirm the connection between the transmitter and the receiver. At this time, the transmitter display stops flashing, and the receiver RF signal indicator is always ON, indicating that the receiver and the transmitter are connected successfully.

PDWMU211

UHF Wireless Microphone System Kit Includes Headset Mic, Lavalier Mic & Beltpack Transmitter

System Features:

  • UHF Band Microphone System
  • Operation Range: Up to 160’+ ft.
  • LED Digital Display Readout Screens
  • Simple Setup & Hassle-Free Operation
  • AF & RF Audio Transmission Signal Strength Indicators
  • Independent & Adjustable Channel Volume Controls
  • Selectable Frequency Range: Up to (8) Channels
  • 1/4″ Audio Output Jack
  • XLR Balanced Output Jack

What’s in the Box:

  • Receiver Base
  • Beltpack Transmitter
  • Headset Microphone
  • Lavalier Microphone
  • Power Cable

Transmitter Specs:

  • RF Output: >10 dBm
  • Modulation Type: FM
  • Max Deviation: ± 40 KHz
  • Spurious Emission: > 55 dBc
  • Nominal Current Drain: < 40mA
  • Battery Powered, Requires (2) x ‘AA’ Batteries -Each

Receiver Specs:

  • Signal/Noise Ratio: -105dB
  • Border Upon Channel Rejection: >70dB
  • T.H.D.: < 1%
  • Audio Output Level: 0-300 mV
  • Dimensions 6.8 x 5.3 x 1.7 in
  • Power Supply: 110/220V (12-15V Power Adapter)

PDWMU103

UHF Wireless Microphone System Handheld Mic & Wireless Transmitter with Universal Plug-and-Play Audio

Features:

  • Wireless Handheld Microphone System
  • UHF (Ultra-High Frequency) Mic Design
  • Easy Plug-and-Play Audio
  • Simple & Hassle-Free Operation
  • Reliable, Distortion-Free Performance
  • Battery-Operated for Wireless Mobility
  • Receiver Features 1/4’’ Jack for Additional Connection
  • Auto-Search Mic Adapter Syncing with Microphone
  • LCD Digital Display Screen for Frequency Read-Out
  • LED Indicator Lights
  • Power ON/OFF Switch
  • Single Channel Selectable Frequency Design (Only 1 Mic Per Receiver)
  • Used for Home Theater Party Karaoke or Stage & Studio DJ Recording
  • Connects to PA Speaker Systems, Amplifiers, Audio Receivers, Mixers

What’s in the Box:

  • Handheld Microphone
  • Receiver Unit
  • USB Connection Cable
  • (2) x ‘AA’ Batteries
  • (2) x ‘AAA’ Batteries

Technical Specs:

  • Microphone System: UHF, PLL 32-Channel Selectable Frequencies
  • Wireless Operation Range: Up to 165’+ ft.
  • Pickup Pattern: Uni-Directional, Cardioid
  • Receiver Interface: 1/4’’ Audio Connector Jack
  • T.H.D: <0.5%
  • Spurious Emission: >40dB
  • Audio Dynamic Range: >100dB
  • S/N Ratio: >96dB @ 1kHz, A-Weighted
  • Battery Operated Microphone, Requires (2) ‘AA’ Batteries
  • Battery Operated Receiver, Requires (2) ‘AAA’ Batteries
  • *Receiver Can Also be Powered via USB Cable
  • Microphone Dimensions (L x D): 9.8’’ x 1.5’’ -inches
  • Receiver Dimensions (L x W x H): 3.4’’ x 2.4’’ x 0.8’’ –inches

PDWMU112

UHF Wireless Microphone System Kit Includes Headset Mic, Lavalier Mic & Beltpack Transmitter

System Features:

  • UHF Band Microphone System
  • Operation Range: Up to 160’+ ft.
  • LED Digital Display Readout Screens
  • Simple Setup & Hassle-Free Operation
  • AF & RF Audio Transmission Signal Strength Indicators
  • Independent & Adjustable Channel Volume Controls
  • Selectable Frequency Range: Up to (8) Channels
  • 1/4″ Audio Output Jack
  • XLR Balanced Output Jack

What’s in the Box:

  • Receiver Base
  • Beltpack Transmitter
  • Headset Microphone
  • Lavalier Microphone
  • Power Cable

Transmitter Specs:

  • RF Output: >10 dBm
  • Modulation Type: FM
  • Max Deviation: ± 40 KHz
  • Spurious Emission: > 55 dBc
  • Nominal Current Drain: < 40mA
  • Battery Powered, Requires (2) x ‘AA’ Batteries -Each

Receiver Specs:

  • Signal/Noise Ratio: -105dB
  • Border Upon Channel Rejection: >70dB
  • T.H.D.: < 1%
  • Audio Output Level: 0-300 mV
  • Dimensions 6.8 x 5.3 x 1.7 in
  • Power Supply: 110/220V (12-15V Power Adapter)

PDWMU114

UHF Wireless Microphone System Kit Includes Handheld Mic, Headset Mic, Lavalier Mic & Beltpack Transmitter

System Features:

  • UHF Band Microphone System
  • Operation Range: Up to 160’+ ft.
  • LED Digital Display Readout Screens
  • Simple Setup & Hassle-Free Operation
  • AF & RF Audio Transmission Signal Strength Indicators
  • Independent & Adjustable Channel Volume Controls
  • Selectable Frequency Range: Up to (8) Channels
  • 1/4″ Audio Output Jack
  • XLR Balanced Output Jack

What’s in the Box:

  • Receiver Base
  • Beltpack Transmitter
  • Headset Microphone
  • Lavalier Microphone
  • Power Cable

Transmitter Specs:

  • RF Output: >10 dBm
  • Modulation Type: FM
  • Max Deviation: ± 40 KHz
  • Spurious Emission: > 55 dBc
  • Nominal Current Drain: < 40mA
  • Battery Powered, Requires (2) x ‘AA’ Batteries -Each

Receiver Specs:

  • Signal/Noise Ratio: -105dB
    Border Upon Channel Rejection: >70dB
  • T.H.D.: < 1%
  • Audio Output Level: 0-300 mV
  • Dimensions 6.8 x 5.3 x 1.7 in
  • Power Supply: 110/220V (12-15V Power Adapter)

PDWMU214

UHF Wireless Microphone System Handheld Mic & Wireless Transmitter with Universal Plug-and-Play Audio

Features:

  • Wireless Handheld Microphone System
  • UHF (Ultra-High Frequency) Mic Design
  • Easy Plug-and-Play Audio
  • Simple & Hassle-Free Operation
  • Reliable, Distortion-Free Performance
  • Battery-Operated for Wireless Mobility
  • Receiver Features 1/4’’ Jack for Additional Connection
  • Auto-Search Mic Adapter Syncing with Microphone
  • LCD Digital Display Screen for Frequency Read-Out
  • LED Indicator Lights
  • Power ON / OFF Switch
  • Single Channel Selectable Frequency Design (Only 1 Mic Per Receiver)
  • Used for Home Theater Party Karaoke or Stage & Studio DJ Recording
  • Connects to PA Speaker Systems, Amplifiers, Audio Receivers, Mixers

What’s in the Box:

  • (2) Handheld Microphone
  • Receiver Unit
  • USB Connection Cable
  • (2) x ‘AA’ Batteries
  • (2) x ‘AAA’ Batteries

Technical Specs:

  • Microphone System: UHF, PLL 32-Channel Selectable Frequencies
  • Wireless Operation Range: Up to 165’+ ft.
  • Pickup Pattern: Uni-Directional, Cardioid
  • Receiver Interface: 1/4’’ Audio Connector Jack
  • T.H.D: <0.5%
  • Spurious Emission: >40dB
  • Audio Dynamic Range: >100dB
  • S/N Ratio: >96dB @ 1kHz, A-Weighted
  • Battery Operated Microphone, Requires (2) ‘AA’ Batteries
  • Battery Operated Receiver, Requires (2) ‘AAA’ Batteries
  • *Receiver Can Also be Powered via USB Cable
  • Microphone Dimensions (L x D): 9.8’’ x 1.5’’ -inches
  • Receiver Dimensions (L x W x H): 3.4’’ x 2.4’’ x 0.8’’ –inches

FAQs Pyle PDWMU112 UHF Wireless Microphone System Kit

What is required for a wireless microphone to function?

Two components make up a wireless microphone system: a transmitter and a receiver. The transmitter accepts an audio stream and uses ultra-high frequency modulation to convey it through the air.

Are speakers required for cordless microphones?

Systems with wireless microphones are silent on their own. They need to be wired into a sound system. It should be noted that certain “all-in-one” portable sound systems already have this connectivity since they include a wireless receiver. All you need to start your class is a suitable headset and transmitter.

What is the microphone’s highest frequency?

The distance between a microphone’s upper and lower limiting frequencies is referred to as its frequency range. The frequency range that can be covered by modern microphones ranges from about 1 Hz to 140 kHz.

What kind of battery is suggested for wireless microphones?

An alkaline battery

What component of a microphone is crucial?

The diaphragm is the microphone’s most crucial part. In actuality, a diaphragm is included in every form of microphone (except for the experimental laser microphone). This is what? A microscopic diaphragm is a thin membrane that moves in response to sound waves (variation in sound pressure).

A UHF wireless microphone system: what is it?

High frequencies between 450 MHz and 952 MHz are used by ultra-high frequency (UHF) wireless microphone systems. When compared to Very High Frequency (VHF) microphones, they have a more reliable connection. VHF microphones are also susceptible to interference from sounds.

What benefits can wireless mics offer?

The mobility of a wireless microphone system is its main benefit. The user is not constrained by the cable’s length because a wireless microphone is not connected by one. Instead than using microphone cords, a wireless microphone transmits audio over the air.

Need batteries to operate wireless microphones?

The power for all wireless microphone transmitters (and some receivers*) comes from batteries. Batteries come in a wide variety, from conventional alkaline batteries to numerous rechargeable battery types, but they don’t always offer the same degree of service.

Do microphones require power?

Active microphones need power to operate, but passive microphones don’t. Power is needed for microphones with integrated active electronics or non-electret electrostatic (condenser) capsules. Powered dynamic microphones are those that lack an inbuilt preamp.

UHF is how many meters?

Ultrahigh frequency, or UHF, is a term used to refer to a traditionally defined area of the electromagnetic spectrum that includes radiations with wavelengths between 0.1 and 1 m and frequencies between 3,000 and 300 megahertz. A lot of UHF transmissions are used in television broadcasting.

For more manuals by Pyle, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Pyle-PDWMU112-UHF-Wireless-Microphone-System-Kit.pdf” download=”all”]

Leave a Comment

Copyright © 2024. All Right Reserved by Manualsdock.com. Sitemap