Shure SM35 Headworn Microphone User Manual

Shure SM35 Headworn Microphone

ABOUT Shure

Shure is a renowned American audio electronics company that specializes in the design and manufacturing of high-quality microphones, headphones, earphones, wireless systems, and other audio equipment. The company was founded in 1925 by Sidney N. Shure and is headquartered in Niles, Illinois.

Shure has established itself as a leading brand in the professional audio industry and is highly regarded for its superior sound quality, durability, and reliability. Its products are widely used by professionals in various fields, including music production, broadcasting, live sound reinforcement, recording studios, and corporate settings.

One of Shure’s most iconic products is the Shure SM58 microphone, which has become a standard in the music industry and is known for its ruggedness and vocal clarity. The company offers a wide range of microphones for different applications, including dynamic microphones, condenser microphones, and lavalier microphones.

In addition to microphones, Shure produces high-quality headphones and earphones for professional and personal use. Their headphone models, such as the Shure SRH840 and SRH1540, are known for their accurate sound reproduction and comfortable fit.

Performance Headset Condenser Microphone

Headworn Microphone

The Shure SM35 is a head-worn electret condenser microphone, intended for use with a wireless bodypack transmitter in live
stage performances.

Wearing the Microphone

1. Install the windscreen on the microphone boom.
2. Place the headband around the back of the head, with the boom on the left side.
3. Place the microphone at the corner of the mouth. To decrease pops and plosives, avoid placing the microphone directly
   in front of the mouth

Note: Do not store the microphone in damp, enclosed spaces. Allow perspiration to dry completely before storing.

Certifications

Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

• Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany
• Phone: +49-7262-92 49 0
• Fax: +49-7262-92 49 11 4
• Email: info@shure.de

Specifications

• Type Electret Condenser
• Frequency Response 40 Hz to 20,000 Hz
• Polar Pattern Unidirectional (Cardioid)
• Output Impedance 100 Ω, @ 1 kHz
• Sensitivity -57.8 dBV/Pa, @ 1 kHz, 1000 Ω load
• Signal-To-Noise Ratio 59.2 dB, @ 1 kHz, 1000 Ω load
• Maximum SPL 151.3 dB, 1000 Ω load, @ 1 kHz, 1% THD
• Dynamic Range 116.5 dB, @ 1 kHz, 1000 Ω load
• Self Noise 34.8 dB SPL-A, 1000 Ω load

Power Requirements

TA4F	+5 V DC (nominal), 10 V maximum (DC bias)
XLR connector	12 to 52 V DC, phantom power

Polarity

TA4F	Positive pressure on diaphragm produces posi- tive voltage on pin 3 with respect to pin 1
XLR	Positive pressure on diaphragm produces posi- tive voltage on pin 2 with respect to pin 3

• Cable  1.1m (45in.)
• Connector TA4F or XLR
• Weight 72 g (2.53 oz.)

Measurements were taken using RPM400 preamp

*All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages but with slightly
decreased headroom and sensitivity.

For more manuals by Shure, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Shure-SM35-Headworn-Microphone.pdf” download=”all”]