EDIFIER TWS6 True Wireless Earbuds with Balanced Armature Drivers User Manual

EDIFIER TWS6 True Wireless Earbuds with Balanced Armature Drivers

ABOUT EDIFIER

There are different sizes of ear tips attached to the package, please select the suitable ones to wear.

Wearing Instructions

How to wear earwigs

• Keep earbud and wearing in the same direction
• Put the earring over the earbud
• Put the ear tip over the earbud

How to wear m1emory foam ear tips

• Pinch: memory foam1 ear tip and put it over the earbud
• Fix the earbud by hand and release unt1l1 the memory foam earns rebounds

User Guide

Charge the Earbuds

• You may hear a warning tone when at a low battery level, please charge the earbuds.
• Charging: place the earbuds in the charging case Charging time: about 1.5 hours for a full charging Indicator light flashing in a breathe pattern=charging Indicator light off when fully charged

Charge the Charging Case

Whenever the charging case is opened, the flashing times of the indicator light on its bottom mean the times that the earbuds can be charged; if the indicator light flashes rapidly, it means the charging case has a low battery capacity, please charge the case in time.

Indicator light flashing= charging Indicator light off= fully charged Rated input: SV= SSmA(earbuds) SV= S00mA(charging case)
Warning: The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in a fire to prevent an explosion.
If the product with lithium battery is not used for long periods, please charge the product at least once per three months.

Power ON/OFF

• Power on automatically when taken out from the charging case;
• Power off automatically while placed in the charging case.

Bluetooth Connection

• Open the charging case, then press and hold the pairing button to enter the pairing state, the indicator light flashes rapidly;
• Set the mobile phone to search for and connect to either “EDIFIER TWS6 L” or “EDIFIER TWS6 R”, after pairing is successful, the indicator light flashes slowly.
• You can choose to use one earbud or both earbuds.

TWS (true wireless stereo) Pairing of the Left and Right Earbuds

The left and right earbuds have finished TWS pairing before leaving the factory. If the wireless connection fails to resume, please follow the steps below to re-pair:

• Place the earbuds in the charging case, then press and hold the pairing button for 8 seconds to enter the TWS pairing state, tthe indicator light flashes rapidly;
• After pairing is done, the blue lights of both earbuds flash slowly.

Functional Operation Instructions

Music Playback

Cal I (same operation for the left and right earbuds)

• Clear pairing records: Whether the charging case is being charged or not, open the case and place the earbuds in it, then press and hold the pairing button for approx. 10 seconds to clear pairing records.

The indicator light is off during charging. 

• Please ensure the earbuds are correctly placed in the charging case.
• When the earbuds are not used for long periods, the battery will enter a sleep state, it needs to charge for about 30 minutes and then the light will be lit.

No sound 

• Check if the earbuds are operating.
• Check if the earbud’s volume is at an appropriate level.
• Check if the earbuds are correctly connected to a mobile phone.
• Check if the earbuds are operating within a normal working range.

The call quality of the earbuds is not good. 

• Check if the mobile phone is in an area with a strong signal.
• Please ensure the earbuds are within effective distance (1 Om) and no obstacle between the earbuds and mobile phone.

When playing music, cannot control pause/play via earbuds. 

• Please ensure the paired device supports the AVRCP (Audio Video Remote Control Profile) profile.

Maintenance

During use, please read the following suggestions carefully.

• Keep the product away from humid places to avoid affecting the internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to cause damage.
• Do not put the product in places exposed to the sun or with high temperatures. The high temperatures will shorten the service life of electronic components, damage batteries, and deform plastic components.
• Do not put the product in cold places to avoid damaging the internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, or strike the product with a hard object to avoid damaging the internal circuit.
• Do not use drastic chemicals or cleaners to clean the product.
• Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting the façade.

If the product cannot operate properly, please send it to your qualified maintenance agency.

Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong

www.edifier.com
©2019 Edifier International Limited. All rights reserved.
Printed in China

NOTICE: 

For the need for technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product. Images are for illustrative purposes only and may differ from the actual product.

FAQS About EDIFIER TWS6 True Wireless Earbuds with Balanced Armature Drivers

For more manuals by Lanzar ManualsDock