YARDWORKS 060-4012-4 Snowblower User Manual

YARDWORKS 060-4012-4 Snowblower

About YARDWORKS

The Yard Works Landscaping is a firm that provides maintenance, landscaping, and snow removal services for both commercial and residential properties. Despite its growth, the company has not outgrown the principles upon which it was formed. When Jerry Haney started the business 48 years ago, he was a teacher who wanted to augment his pay over the summer. Jerry put a lot of effort into growing The Yard Works Landscaping. He made himself accessible to them “from morning until night” during each season because he believed that happy clients were the cornerstone of a successful business. Jerry started to get several licenses to hone his talents because he wanted to do what was best for his company and, in particular, for his clients. The client benefited from Jerry’s expanding knowledge and great work ethic.

SAFETY DEFINITIONS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

GENERAL SAFETY

• Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.
• Never allow children under 16 years old to operate the equipment. Never allow adults to operate the equipment without proper instruction.
• Thrown objects can cause serious injury. Keep the area of operation clear of all persons, particularly small children, and pets. Plan your snow discharge pattern to prevent throwing material toward cars, structures, roads, and people.
• Exercise caution to avoid slipping or falling, especially when operating in reverse.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
• Never use the snowblower under the influence of alcohol, medication, or recreational drugs, or if you are tired or ill.

PREPARATION FOR US

• Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.
• Disengage all clutch handles before starting the motor.
•  Do not operate the equipment without wearing adequate winter garments. Wear footwear that will improve footing on slippery surfaces.
• Adjust the auger housing height to clear gravel or crushed rock surface.
• Never attempt to make any adjustments while the engine is running (except where specifically recommended in the manual).
• Let the engine and machine adjust to outdoor temperatures before starting to clear snow.
• The operation of any powered machine can result in foreign objects being thrown into the eyes. Always wear safety glasses or eye shields during operation, or while performing an adjustment or repair.
• Inspect the auger and impeller before starting to ensure that there is no ice build-up.

SAFE HANDLING OF GASOLINE

To avoid severe injury or property damage use high levels of care while handling gasoline. Gasoline is an extremely flammable substance and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. If you come into contact with gasoline, wash affected areas of your skin and change clothing immediately.

• Use only an approved gasoline container.
• Extinguish all cigarettes, cigars, pipes, and other sources of ignition prior to working with or near gasoline.
• Never refuel the machine within closed spaces.
• Never remove the gas cap or add fuel while the engine is hot or running.
• Allow the engine to cool for at least two minutes before refueling.
• Do not over-fill the fuel tank. Keep fuel
  at least ½” (1.27 cm) below the bottom of the filler neck to provide space for fuel expansion.
• Replace the gasoline cap and tighten it securely.
• If gasoline is spilled, wipe it off the engine and equipment. Move the machine to another area. Wait 5 minutes before starting the engine.
• Never store the machine or fuel container indoors where there is an open flame, spark, or pilot light (e.g., furnace, water heater, space heater, clothes dryer, etc.).
• Allow the machine to cool for at least 5 minutes before storing.
• Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling them.
• If possible, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.
• Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use gas cans with nozzle lock open devices.

MAINTENANCE AND STORAGE

• Check shear bolts, engine mounted bolts, etc., at frequent intervals for proper tightness to sure the equipment is in safe, working condition.
• Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, clothes dryers, or any open flame sources. Allow the engine to cool before storing it in any enclosure.
• Always refer to the owner’s guide instructions for important details if the snowblower is to be stored for an extended period.
• Maintain or replace safety and instructions labels, as necessary.
• Run the snowblower for one minute to clear out packed snow and ice to prevent freeze-up during storage.

Specifications

SNOWBLOWER

• Discharge Chute Rotation Lever
• Auger Control Lever
• Speed Control Lever
• Shear Pin Storage
• Discharge Chute Deflector Lever
• Self-drive Control Lever
• Grip Heat Warmer Switch
• Clean-out Tool
• Upper Handle
• Discharge Chute Deflector
• Discharge Chute
• Auger
• Shave Plate
• Skid Shoes
• Auger Housing
• Wheels
• Lower Handle
• Handle Locking Knobs
• Lights

ENGINE

• Key (Safety Lock Out)
• Primer Bulb
• Throttle Lever
• Choke Lever
• Fuel Valve (On/Off)
• Fuel Cap
• Electric Start Button
• Recoil Starter Grip
• Oil Fill and Level Check Cap
• Oil Drain Plug

UNPACKING

1. Set the shipping carton on a solid, flat surface.
2. Remove everything loose from the carton.
3. Cut down the bottom carton to allow a flat surface area to install the assembly parts without scratching parts or cutting tires.
4. Now you are ready for assembly

TOOlS ReQUIReD
Part		Size
Wrench (included)     ADDITIONAl PARTS		13,16
Part	Part Qty.		Usage
Shear Pins	4		Spare part (preassembled)
Clip (for auger)	4		Spare part (preassembled)
Starter Electric Cord	1		Accessory
Engine Oil	1
ASSeMbly PARTS

SAFE HANDLING OF GASOLINE

To avoid severe injury or property damage use high levels of care while handling gasoline. gasoline is an extremely flammable substance and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. If you come into contact with gasoline, wash affected areas of your skin and change clothing immediately.

1. Use only an approved gasoline container.
2. Extinguish all cigarettes, cigars, pipes, and other sources of ignition prior to working with or near gasoline.
3. Never refuel the machine within closed spaces.
4. Never remove the gas cap or add fuel while the engine is hot or running.
5. Allow the engine to cool for at least two minutes before refueling.
6. Do not over-fill the fuel tank. Keep the fuel level at least ½” (1.27 cm) below the bottom of the filler neck to provide space for fuel expansion.
7. Replace the gasoline cap and tighten it securely.
8. If gasoline is spilled, wipe it off the engine and equipment. Move the machine to another area. Wait 5 minutes before starting the engine.
9. Never store the machine or fuel container indoors where there is an open flame, spark, or pilot light (e.g., furnace, water heater, space heater, clothes dryer, etc.).
10. Allow the machine to cool for at least 5 minutes before storing.
11. Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling them.
12. If possible, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.
13. Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use gas cans with nozzle lock-open devices.

PREPARATION FOR USE

1. Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.
2. Disengage all clutch handles before starting the motor.
3. Do not operate the equipment without wearing adequate winter garments. Wear footwear that will improve footing on slippery surfaces.
4. Adjust the auger housing height to clear gravel or crushed rock surface.
5. Never attempt to make any adjustments while the engine is running (except where specifically recommended in the manual).
6. Let the engine and machine adjust to outdoor temperatures before starting to clear snow.
7. The operation of any powered machine can result in foreign objects being thrown into the eyes. Always wear safety glasses or eye shields during operation, or while performing an adjustment or repair.
8. Inspect the auger and impeller before starting to ensure that there is no ice buildup.

CLEARING A CLOGGED DISCHARGE CHUTE

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snowblowers. Never use your hand to clean out the discharge chute or auger assembly.

To clear the chute:

1. SHUT THE ENGINE OFF!
2. Wait 10 seconds to be sure the impeller blades have stopped rotating.
3. Always use a clean-out tool. DO NOT use your hands.

OPERATION AT HIGH ALTITUDE

The density of air at high altitudes is lower than at sea level. Engine power is reduced as the air mass and air-fuel ratio decrease. Engine power will be reduced by approximately 3 ½% for every 1000′ (304 m) of elevation above sea level. This is a natural trend and cannot be changed by adjusting the engine. At high altitudes increased exhaust emissions can also result due to the increased enrichment of the air-fuel ratio. Other high-altitude issues can include hard starting, increased fuel consumption, and spark plug fouling. To alleviate high-altitude issues other than natural power loss, we can provide a high-altitude carburetor main jet at an additional cost.

The part number and recommended minimum altitude for the application of the high-altitude carburetor main jet are listed in the following table. In order to select the correct high-altitude main jet, it is necessary to identify the carburetor model. For this purpose, a code is stamped on the side of the carburetor. Select the correct high-altitude jet part number corresponding to the carburetor code found on your particular carburetor.

STOPPING THE ENGINE

To stop the engine in an emergency or during normal operation, remove the engine key (safety lockout) from the keyhole.

Controls

SELF-DRIVE CONTROL LEVER.

Located on the left side (from behind the snowblower). When the snowblower has been put into gear, pushing this lever towards the handle engages the wheels. Releasing the self-drive control lever causes the machine to stop moving.

SPEED CONTROL LEVER.

Forward speeds range from slowest position 1 to fastest position 6. Reverse speeds range from the slowest position R1 to the fastest position R2.

CLUTCH LOCK FEATURE

This snowblower offers a clutch lock feature that will enable the operator to keep the snowblower moving forward while you adjust the chute. To use the clutch lock system, follow the following steps.

• While both the drive and auger control levers are fully depressed, release the auger control lever while keeping the self-drive control lever fully depressed. The clutch lock feature will automatically keep the auger control lever engaged as long as the self-drive control lever is depressed.
• This allows the operator to keep driving the snowblower while they now use their right hand to make any adjustments to the discharge chute needed to maximize operation.
• To disengage the clutch lock feature simply release the self-drive control lever.

LUBRICATION

No parts inside the gearbox are to be lubricated. All bearings and bushings are permanently lubricated and require no maintenance. Lubricating these parts will only result in the grease getting on to the friction wheel and disc drive plate, which could damage the rubber clad friction wheel.

LONG-TERM STORAGE

Never store the machine with gasoline in the fuel tank in a confined area with poor ventilation. Gasoline fumes could reach open flames, sparks, cigarettes, etc. To avoid the engine freezing and problems starting the engine, leave the engine running for 5-10 minutes after your work has been completed. This will ensure all moisture will disappear that would otherwise cause starting problems. If the machine is to be stored for a longer period than 30 days, the following procedures are recommended.

1. Mix fuel stabilizer with gasoline according to fuel stabilizer manufacturer’s directions.
2. Start the engine and let it run until it stops due to lack of fuel.
3. Change the engine oil if it has not been done for 3 months.
4. Remove the spark plug and empty a little engine oil (about 1 oz {30 mL}) in the hole. Crank the engine a couple of times. Replace the spark plug.
5. Clean the whole machine thoroughly.
6. Inspect the machine for damage, and repair if necessary.
7. Apply rust protection to the metal surfaces.
8. Store the machine indoors if possible.

REGULAR SERVICE PERIODS

Perform at every indicated month or operating hour interval, whichever comes first.

Item	Service	each Use	every month   or 20 hrs.	every 3 months or   50 hrs.	every 6 months or   100 hrs.	every year or 150 hrs.
Engine Oil	Check level
	Change
Spark Plug	Check/Clean
	Replace
Spark Arrester (optional parts)	Clean
Idle Speed	Check-adjust					(1)
Valve Clearance	Check-adjust					(1)
Fuel Tank and Strainer	Clean					(1)
Fuel Line	Check	Every 2 years (replace if necessary) (1)

These items should be serviced by your servicing dealer unless you have the proper tools and are mechanically proficient. Refer to the manual for service procedures.

TROUBLESHOOTING

LIMITED

4-YEAR LIMITED WARRANTY

For Four YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at its option, repair or replace for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship.

THIS WARRANTY DOES NOT COVER:

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration;
2. The unit, if it has not been operated and/or maintained in accordance with the owner’s manual;
3. Normal wear parts like belts, skid shoes and shave plates except as noted below;
4. Routine maintenance items such as oil, spark plug, fuel line; or
5. Normal deterioration of the exterior finish due to use or exposure.

FULL 270-DAY WARRANTY ON NORMAL WEAR PARTS:

Normal wear parts are defined as wheels, tires, belts, drive discs, skid shoes, and shave plates. These parts are warranted to the original purchaser to be free from defects in material and workmanship for a period of two hundred seventy (270) days from the date of retail purchase.

HOW TO OBTAIN SERVICE:

Warranty service is available by calling the toll-free helpline at 1.866.523.5218. The factory will not accept the return of a complete unit unless prior written permission has been extended by YARDWORKS CANADA.

TRANSPORTATION CHARGES:

Transportation charges for the movement of the generator or accessories are the responsibility of the purchaser. The purchaser must pay transportation charges for any part submitted for replacement under this warranty unless such a return is requested in writing by YARDWORKS CANADA.

OTHER WARRANTIES:

All other warranties, express or implied, including any implied warranty of merchantability is limited in its duration to that set forth in this express limited warranty. The provisions as set forth in this warranty provide the sole and exclusive remedy of YARDWORKS CANADA obligations arising from the sale of its products.

FAQs YARDWORKS 060-4012-4 Snowblower