Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor User Guide

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor featured

ViewSonic LOGO

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor

Safety Precautions

Please read the following Safety Precautions before you start using the device.

  • Keep this user guide in a safe place for later reference.
  • Read all warnings and follow all instructions.
  • Sit at least 18″ (45 cm) away from the device.
  • Allow at least 4″ (10 cm) clearance around the device to ensure proper ventilation.
  • Place the device in a well-ventilated area. Do not place anything on the device that prevents heat dissipation.
  • Do not use the device near water. To reduce the risk of fire or electric shock, do not expose the device to moisture.
  • Avoid exposing the device to direct sunlight or other sources of sustained heat.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that may increase the temperature of the device to dangerous levels.
  • Use a soft, dry cloth to clean the external housing. For more information, refer to the “Maintenance” section of this manual.
  • Avoid touching the screen, as oil may collect on the screen if you touch it.
  • Do not touch the screen surface with sharp or hard objects, as it may cause damage to the screen.
  • Do not place the device on cloth or other materials that may be placed between the product and supporting furniture.
  • When moving the device, be careful not to drop or bump the device on anything.
  • Do not place the device on an uneven or unstable surface. The device may fall over resulting in an injury or a malfunction.
  • Do not place any heavy objects on the device or connection cables.
  • Always use cabinets, stands, or installation methods recommended by the manufacturer of the device set.
  • Always use furniture that can safely support the device.
  • Always ensure the device is not overhanging the edge of the supporting furniture.
  • Do not place the device on tall furniture, such as cupboards or bookcases, without anchoring both the furniture and the device to a suitable support.
  • Always educate children about the dangers of climbing on furniture to reach the device or related equipment.
  • Do not place the monitor where children are likely to be present.
  • Do not place items that might tempt children to climb, such as toys and remote controls, on the top of the device or furniture on which the product is placed.
  • If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device.
  • Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the plug does not fit into your outlet, obtain an adapter and do not attempt to force the plug into the outlet.
  • When connecting to a power outlet, Do not remove the grounding prong. Please ensure grounding prongs are never removed.
  • Always route and manage cords and cables connected to your device so they cannot be tripped over, pulled, or grabbed.
  • Protect the power cord from being trodden upon or pinched, particularly at the plug, and at the point where it emerges from the equipment. Ensure that the power outlet is located near the equipment so that it is easily accessible.
  • Disconnect the power plug from the power outlet if the device is not being used for a long period.
  • Please confirm the distribution system installed in the building. The system should provide a circuit breaker rated at 120/240V, 20A.
  • Only use attachments/accessories, such as carts, stands, tripods, brackets, or tables, specified by the manufacturer.
  • When a cart is used, use with caution when moving the cart/equipment combination to avoid injury from tipping over.
  • Refer all servicing to qualified service personnel. Service will be required when the unit has been damaged in any way, such as:
    • if the power supply cord or plug is damaged.
    • if the liquid is spilled onto or objects fall into the unit.
    • if the unit is exposed to rain or moisture.
    • if the unit does not operate normally or has been dropped.
  • When using ear-/headphones, adjust the volume to appropriate levels, or hearing damage may result.
  • Fastening the display to a wall or fixed object using cordage or other restraining devices can help support the weight of the display to prevent the display from falling over.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 1

NOTE:

  • The restraining device/cordage should be able to withstand 100N force.
  • Make sure the cordage is straightened, and any slack is removed. The back of the device shall face the wall to ensure the device cannot tilt under external force.
  • Make sure the display does not tilt under external force at any height and rotation angle of the device.
  • If the existing display is going to be retained and relocated, the same considerations as above should be applied.

Introduction

Package Contents

  • Monitor
  • Power cord
  • Video cable
  • Quick start guide

NOTE
The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.

Product Overview

Front View

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 2

Rear View

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 3

Initial Setup

This section provides detailed instructions for setting up your monitor.

Installing the Stand

  1. Place the monitor on a flat, stable surface with the screen facing down
  2. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 4Align and connect the two (2) points on the monitor stand’s base with the monitor stand’s neck
  3. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 5Use the captured screw in the monitor stand’s base and secure it to the monitor stand’s neck.
  4. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 6Lift the device into its upright position on a flat, stable surface.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 7

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

NOTE
For use only with a UL-certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 8

  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Remove the four (4) screws.
  4. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 9 Pull down slightly to disengage the hooks and remove the stand.
  5. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 10Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  6. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 11Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

Using the Security Slot
To help prevent the device from being stolen, use a security slot-locking device to secure the device to a fixed object. Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor to prevent the monitor from falling over. Below is an example of setting up a security slot-locking device on a table.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 12

Making Connections

This section guides you on how to connect the monitor with other equipment.

Connecting to Power

  1. Connect the power cord to the AC IN jack at the rear of the device.
  2. Connect the power cord plug to a power outlet.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 13

Connecting External Devices

HDMI Connection
Connect one end of an HDMI cable to the HDMI port of your monitor. Then connect the other end of the cable to the HDMI port of your computer.

NOTE
The monitor is equipped with two HDMI 2.0 ports.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 14

DisplayPort Connection
Connect one end of a DisplayPort cable to the DisplayPort port. Then connect the other end of the cable to the DisplayPort or mini DP port of your computer.

NOTE
To connect the monitor to the Thunderbolt port (v. 1&2) on your Mac, connect the mini DP end of the “mini DP to DisplayPort cable” to the Thunderbolt output of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 15

USB Connection
Connect one end of a USB cable to a USB port of the monitor. Then connect the other end of the cable to a USB port of your computer.

NOTE
The monitor supports three (3) types of USB ports. When making the connection(s), observe the following guidelines:

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 16

NOTE
It is not necessary to connect to all three types of USB ports simultaneously. The user’s personal usage scenario will determine which, if any, USB ports are used.

Using the Monitor

Adjusting the Viewing Angle
For optimal viewing, you can adjust the viewing angle using any of the following methods:

Height Adjustment
Lower or raise the monitor to the desired height (0 to 130 mm).

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 17

Tilt Angle Adjustment
Tilt the monitor forwards or backward to the desired viewing angle (-5˚ to 21˚)

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 18

Screen Orientation Adjustment (Monitor Pivot)

  1. Adjust the monitor height to the highest position. Then tilt the monitor backwards to the full tilt position.
  2. ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 19 Rotate the monitor 90° clockwise or counterclockwise from landscape to portrait orientation.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 20

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 21

Swivel Angle Adjustment
Swivel the monitor to the left or right for the desired viewing angle (60˚)

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 22

Turning the Device On/Off

  1. Plug the power cord into a power outlet.
  2. Press the Power button to turn on the monitor.
  3. To turn the monitor off, press the Power button again.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 23

Advanced Features and Settings

This section describes the advanced features of the monitor.

Auto Pivot
With the Auto Pivot function, the monitor can detect the image display and adjust the image’s orientation on the screen automatically when pivoting the screen vertically or horizontally.

NOTE
The Auto Pivot function uses DDC/CI to communicate with the monitor. Before applying the Auto Pivot function, please make sure the DDC/CI setting is set to On.

To enable the DDC/CI setting:

  1. Open the OSD Menu and select the Setup Menu menu. Then press the 3 key to enter the menu.
  2. Press the 1 or 2 key to select DDC/CI. Then press the 3 key to enter its sub-menu.
  3. Press the 1 or 2 key to select On. Then press the 3 key to confirm.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 24

After ensuring DDC/CI is On, proceed to set OSD Pivot to Auto:

  1. Open the OSD Menu and select the Setup Menu menu. Then press the 3 key to enter the menu.
  2. Press the 1 or 2 key to select OSD Pivot. Then press the 3 key to enter its submenu.
  3. Press the 1 or 2 key to select Auto. Then press the 3 key to confirm.

Colorbration+
Some specific models support the hardware color calibration function to ensure long-term color accuracy. The Colorbration+ application installation file can be found at: http://color.viewsonic.com/support/software/. Standard monitor packing does not include the color sensor, which the Colorbration+ application needs for the calibration process. Compatible color sensors include:

  • X-Rite i1 Display Pro
  • X-Rite i1 Pro 2
  • X-Rite i1 Studio
  • Xrite Colormunki Photo
  • Xrite Colormunki Design
  • Datacolor Spyder 5
  • Datacolor SpyderX series

Specifications

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 25

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 26
ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 27
ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 28

Troubleshooting

This section describes some common problems that you may experience when using the monitor.

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 29

ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 30
ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 31
ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor 32

Maintenance

General Precautions

  • Make sure the monitor is turned off and the power cable is unplugged from the power outlet.
  • Never spray or pour any liquid directly onto the screen or case.
  • Handle the monitor with care, as a darker-colored monitor, if scuffed, may show marks more clearly than a lighter-colored monitor.

Cleaning the Screen

  • Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
  • If the screen is still not clean, apply a small amount of non-ammonia, nonalcohol-based glass cleaner onto a clean, soft, lint-free cloth; then wipe the screen.

Cleaning the Case

  • Use a soft, dry cloth.
  • If the case is still not clean, apply a small amount of non-ammonia, non-alcohol-based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

  • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor.
  • ViewSonic® will not be liable for damage resulting from the use of any ammonia or alcohol-based cleaners.

Regulatory and Service Information

Compliance Information
This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit.

FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Limited Warranty

What the warranty covers
ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, and as your sole remedy, repair or replace the product with a similar product. Replacement Products or parts may include remanufactured or refurbished parts or components.

The repair or replacement unit or parts or components will be covered by the balance of the time remaining on the customer’s original limited warranty and the warranty period will not be extended. ViewSonic® provides no warranty for any third-party software whether included with the product or installed by the customer, installation of any unauthorized hardware parts or components (e.g. Projector Lamps). (Please refer to: “What the warranty excludes and does not cover” section).

How long the warranty is effective
ViewSonic® displays are warranted for between 1 and 3 years, depending on your country of purchase, for all parts including the light source, and for all labor from the date of the first consumer purchase.

Who the warranty protects
This warranty is valid only for the first consumer purchaser.

What the warranty excludes and does not cover

  • Any product on which the serial number has been defaced, modified, or removed.
  • Damage, deterioration, or malfunction resulting from:
    • Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
    • Repair or attempted repair by anyone not authorized by ViewSonic®.
    • Damage to or loss of any programs, data, or removable storage media.
    • Normal wear and tear.
    • Removal or installation of the product.
  • Software or data loss occurring during repair or replacement.
  • Any damage to the product due to shipment.
  • Causes external to the product, such as electric power fluctuations or failure.
  • Use of supplies or parts not meeting ViewSonic’s specifications.
  • Failure of the owner to perform periodic product maintenance as stated in the User Guide.
  • Any other cause which does not relate to a product defect.
  • Damage is caused by static (non-moving) images displayed for lengthy periods (also referred to as image burn-in).
  • Software – Any third-party software included with the product or installed by the customer.
  • Hardware/Accessories/Parts/Components – Installation of any unauthorized hardware, accessories, consumable parts, or components (e.g. Projector Lamps).
  • Damage to, or abuse of, the coating on the surface of the display through inappropriate cleaning as described in the product User Guide.
  • Removal, installation, and set-up service charges, including wall-mounting of the product.

How to get service

  • For information about receiving service under warranty, contact ViewSonic® Customer Support (Please refer to the “Customer Service” page). You will need to provide your product’s serial number.
  • To obtain warranty service, you will be required to provide: (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.
  • Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®.
  • For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®.

Limitation of implied warranties
There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

For more Manuals by VIEWSONIC, visit MANUALSDOCK

FAQS About ViewSonic VP2756 27 Inch IPS 4K Ergonomic Monitor

What is the screen size of the ViewSonic VP2756 monitor?

The ViewSonic VP2756 monitor features a 27-inch screen size.

What is the display resolution of the ViewSonic VP2756 monitor?

The ViewSonic VP2756 monitor boasts a 4K Ultra HD resolution of 3840 x 2160 pixels.

What type of panel does the ViewSonic VP2756 monitor use?

The ViewSonic VP2756 monitor utilizes an IPS (In-Plane Switching) panel, known for its superior color accuracy and wide viewing angles.

Does the ViewSonic VP2756 monitor support ergonomic adjustments?

Yes, the ViewSonic VP2756 monitor offers extensive ergonomic adjustments, including height adjustment, tilt, swivel, and pivot, allowing users to customize the monitor for their comfort and productivity.

What are the connectivity options available on the ViewSonic VP2756 monitor?

The ViewSonic VP2756 monitor offers a variety of connectivity options, including HDMI, DisplayPort, USB 3.1 Type-C, USB 3.0, and audio in/out ports.

Does the ViewSonic VP2756 monitor support HDR (High Dynamic Range)?

Yes, the ViewSonic VP2756 monitor supports HDR10 content, providing enhanced brightness, contrast, and color accuracy for a more immersive viewing experience.

Is the ViewSonic VP2756 monitor suitable for professional color-critical work?

Absolutely, the ViewSonic VP2756 monitor is designed for professional use, featuring factory calibration and Delta E<2 color accuracy, making it ideal for graphic design, photo editing, and other color-sensitive tasks.

Does the ViewSonic VP2756 monitor feature any eye care technologies?

Yes, the ViewSonic VP2756 monitor incorporates Flicker-Free technology and a Blue Light Filter, helping to reduce eye strain during prolonged use.

Can the ViewSonic VP2756 monitor be used in a multi-monitor setup?

Certainly, the ViewSonic VP2756 monitor supports daisy-chaining via DisplayPort, allowing for easy setup of multi-monitor configurations.

What is included in the box when purchasing the ViewSonic VP2756 monitor?

Along with the monitor itself, the box typically contains necessary cables (such as HDMI, DisplayPort, and USB-C), a power cord, and a quick start guide to assist with setup and installation. Additional accessories may vary depending on the retailer or specific package.

Leave a Comment