Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Tribit Flybuds 3 Wireless Earbuds User Manual

Tribit Flybuds 3 Wireless Earbuds featured

Tribit LOGO

Tribit Flybuds 3 Wireless Earbuds

Tribit Flybuds 3 Wireless Earbuds

Package Contents

Tribit Flybuds 3 Wireless Earbuds 1

Product Parts

Tribit Flybuds 3 Wireless Earbuds 2

How to Replace the Ear Tips

Tribit Flybuds 3 Wireless Earbuds 3

How to Wear the Earbuds

Tribit Flybuds 3 Wireless Earbuds 4

On / Off

The first time you use the earbuds, please tear off the insulation sticker. Then place them in the charging case and close it.

Tribit Flybuds 3 Wireless Earbuds 5

Tribit Flybuds 3 Wireless Earbuds 6

Bluetooth Connection Guidelines

Connect the earbuds with a Bluetooth device
Open the top cover of the charging case, and the earbuds will automatically enter Bluetooth pairing mode. Open the Bluetooth function in the Bluetooth device, refresh the Bluetooth device search, and click the audio device named “FlyBuds 3” to connect. After successfully connecting, the earbuds indicator will go off.

Tribit Flybuds 3 Wireless Earbuds 7

The two ways to connect with other devices are as follows

  1. Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
  2. Please refer to number 11, earbuds reset operation. After resetting successfully, they will enter Bluetooth pairing mode.

Button Functionality

Tribit Flybuds 3 Wireless Earbuds 8

Tribit Flybuds 3 Wireless Earbuds 9

Earbuds Indicator Light Display

  • Touch Button: white light is on when touched.
  • Bluetooth Pairing: red light flashes slowly
  • Successful Connection: The indicator light is off.
  • Low Battery: red light quickly flashes twice every 20

Charging Case Indicator Display

  • Open the upper cover of the charging case or short-press the charging case button to display the battery power for 10 seconds.

Tribit Flybuds 3 Wireless Earbuds 10

  • The indicator light displays when the earbuds are in charging mode
    The left-most and right-most indicator lights of the charging case will show the charging status of the left and right earbuds respectively. During the charging process, the indicator lights will always be on. When fully charged, they will be off.

Charging Guidelines

  • Charging of the earbuds: Put earbuds into the charging case. Then close the cover and charging will begin.

Charging time of earbuds: about 90 minutes.

  • Charging of the charging case: Insert one end of the USB cable into a power supply that supports 5V output, and the other end into the charging port of the charging case. The indicator lights will flash while it is charging, and the 4 indicator lights will always be on when it is fully charged.

Charging time of the charging case: about 210 minutes.

How to Reset the Earbuds

Place the left and right earbuds back into the charging case. With the cover open, press and hold the charging case button until the 4 indicator lights of the charging case flash four times at the same time, indicating that the earbuds are successfully reset.

Note
If there is a Bluetooth device connected to the earbuds after resetting, the pairing will need to be deleted for successful re-pairing.

The Left & Right Earbuds Pairing Guidelines

First, disconnect the earbuds from the Bluetooth device. Put the left and right earbuds into the charging case, then take them out. Double-tap the touch button and the red light will flash slowly. Then long press the touch button until the red light flashes quickly. After a few seconds, the red light on the left earbud will flash slowly, and the red light on the right earbud will be off, indicating that the left and right earbuds are successfully paired and connected.

Note
When the left and right earbuds lose connection.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy.

If not installed and used by the instructions, it may cause harmful interference to radio communication. However, there is no guarantee that interference won’t occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on. Users are encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit that is different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

For more Manuals by TRIBIT, visit MANUALSDOCK

FAQS About Tribit Flybuds 3 Wireless Earbuds

Are the Tribit Flybuds 3 waterproof?

Yes, the Tribit Flybuds 3 are IPX7 waterproof, which means they can withstand immersion in water up to 1 meter for 30 minutes.

What is the battery life of the Tribit Flybuds 3?

The earbuds offer up to 100 hours of total playtime when used with the charging case. Each earbud alone provides about 10 hours of playtime on a single charge.

Do the Tribit Flybuds 3 have noise cancellation?

The Tribit Flybuds 3 do not have active noise cancellation, but they do provide passive noise isolation due to their in-ear design.

Are the Tribit Flybuds 3 compatible with Bluetooth 5.0?

Yes, the Tribit Flybuds 3 feature Bluetooth 5.0 technology, offering a stable and efficient connection.

Do the Tribit Flybuds 3 have a microphone for hands-free calls?

Yes, these earbuds are equipped with a built-in microphone, allowing you to make and receive calls hands-free.

How do I control music playback with the Tribit Flybuds 3?

The earbuds feature touch controls for easy playback management, such as play/pause, skip tracks, and answer/end calls.

What sizes of ear tips are included with the Tribit Flybuds 3?

The Tribit Flybuds 3 come with three pairs of ear tips (small, medium, large), ensuring a comfortable and secure fit for most users.

Can I use the Tribit Flybuds 3 with only one earbud?

Yes, you can use either the left or right earbud independently, allowing for flexibility in single-ear listening.

Do the Tribit Flybuds 3 support voice assistants like Siri or Google Assistant?

Yes, these earbuds support voice assistants, enabling you to access features and information hands-free.

What colors are available for the Tribit Flybuds 3?

The Tribit Flybuds 3 are available in black, white, and blue color options, allowing you to choose a style that suits your preference.

Leave a Comment