Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Sony PlayStation VR2 Sense Controller Charging Station Manual

Sony featured

Sony LOGO

Sony PlayStation VR2 Sense Controller Charging Station

Sony PlayStation VR2 Sense Controller Charging Station

Specifications

Sony PlayStation VR2 Sense Controller Charging Station 1

Compliance Information

FCC and ISED Canada Notice

Notes:

  • This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
  • If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
  • You are cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
  • For assistance with this product, visit playstation.com/help. The phone number in the supplier’s declaration of conformity is only for FCC electrical interference inquiries.

Health and Safety

Before using this product, carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference. Parents or guardians of children should read this manual for safe use. This product has been designed with the highest concern for safety.

However, any electrical device, if used improperly, has the potential to cause fire, electrical shock, or personal injury. Observe all warnings, precautions, and instructions. Stop use and disconnect the AC power cord immediately if the product functions in an abnormal manner, produces unusual sounds or smells, or becomes too hot to touch.

Warning

YOUNG CHILDREN INJURIES
CHOKING HAZARD–Small parts. Keep the product out of the reach of young children. Young children may swallow small parts or wrap the cables around themselves, which may inflict injury or cause an accident or a malfunction.

MAGNETS AND MEDICAL DEVICES
This product has magnets that may interfere with pacemakers, defibrillators programmable shunt valves, or other medical devices. Do not place this product close to such medical devices or persons who use such medical devices. Consult your doctor before using this product if you use such medical devices.

Precautions

AC adaptor and AC power cord

  • Only use the AC adaptor, charging adaptor, and AC power cord included with the product. The AC adaptor and AC power cord are designed specifically for use with this product only, and the charging adaptor is for the PlayStation VR2 Sense™ controller only. Do not use them with any other products.
  • Do not connect the AC power cord to a voltage transformer or inverter. Connecting the cord to a voltage transformer for overseas travel or an inverter for use in a vehicle may cause it to heat up in the AC adaptor and may cause burns or a malfunction.
  • Unplug the cord and cables if you want to clean or move the product or do not intend to use it for an extended period. When disconnecting, hold the cord by the plug and pull it straight out of the socket. Never pull by the cord and do not pull out at an angle.

Liquid, dust, smoke, steam, and heat

  • Always ensure the product and its connectors are free of liquid, excess dust, and small particles.
  • Do not leave the product in the following areas during use, storage, or transportation.
  • Areas exposed to smoke or steam
  • Areas with high humidity, dust, or cigarette smoke
  • Areas near heating appliances, areas exposed to direct sunlight, or areas that retain heat.

Set up and handling

  • Do not use the cords if they are damaged or modified.
  • Do not place heavy items on the product, adaptor, or cord, throw or drop the product, or otherwise expose it to strong physical impact.
  • Do not place the product on surfaces that are unstable, tilted, or subject to vibration.
  • Do not leave the product on the floor.
  • Do not walk on the cord or cables or pinch them, particularly at plugs, receptacles, connectors, and where they exit from the product.
  • Do not pull or bend the cord with excessive force.
  • Do not touch the plugs, or connectors, or insert any foreign objects into them or the product.
  • Arrange the cables carefully to avoid tripping over them.
  • Do not swing the product or adaptor around by their cord.
  • Do not expose the product, battery, or accessories to high temperatures, high humidity, or direct sunlight during operation, transportation, and storage.

Care and cleaning

Follow the precautions below to help prevent the product exterior from deteriorating or discoloring.

  • Do not apply volatile substances such as insecticides.
  • Do not allow rubber or vinyl materials to be in prolonged contact with the product.
  • Do not use thinner, benzine, or alcohol. Avoid using wipes, chemically treated cloths, and other products that contain such substances.
  • Wipe with a soft, dry cloth.

End-of-life product recycling
The product is made of many materials that may be recycled. Follow local regulations when disposing of this product. Sony products can be recycled for free in the United States and Canada by dropping the product off at several nationwide locations. Visit www.sony.com/ecotrade for details.

Charging

  1. Connect the supplied AC power cord to the supplied AC adaptor. Then, connect the AC adaptor to the DC IN connector on the charging station. Make all connections before plugging the AC power cord into an electrical outlet.Sony PlayStation VR2 Sense Controller Charging Station 2
  2. Attach the charging adaptors to the PlayStation VR2 Sense™ controller. The left and right charging adaptors are interchangeable.Sony PlayStation VR2 Sense Controller Charging Station 3
  3. Attach each of the controllers to the charging station. With the charging adaptors attached, insert each controller into the charging station’s connector. The controller’s status indicator will slowly blink white and turn off when charging is complete.Sony PlayStation VR2 Sense Controller Charging Station 4

Supplier’s Declaration of Conformity

  • Trade Name: SONY
  • Model No. : CFI-ZSS1
  • Responsible Party: Sony Electronics Inc.
  • Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
  • Telephone No. : 858-942-2230 (Only for FCC electrical interference inquiries)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003.

LIMITED WARRANTY

Sony Interactive Entertainment LLC (“SIE LLC”) warrants to the original purchaser that this product shall be free from defects in material and workmanship for one (1) year from the date of purchase. This warranty does not apply to any consumables (such as batteries). For defects in material or workmanship within the warranty period, upon showing proof of purchase, SIE LLC agrees for one (1) year to either repair or replace this product with a new or factory-recertified product at SIE LLC’s option. For this Limited Warranty, “factory recertified” means a product that has been returned to its original specifications. Visit playstation.com/helpor and call 1-800-345-7669 to receive a return authorization and shipping instructions.

As the original purchaser, you will be responsible for inbound shipping costs and any packaging materials required. SIE LLC will then return the repaired or replaced product at no cost to you including return shipping. This warranty shall not be applicable and shall be void if the defect in the SIE LLC product has arisen through abuse, unreasonable use, mistreatment, neglect, or means other than from a defect in materials or workmanship. THIS WARRANTY IS INSTEAD OF ALL OTHER WARRANTIES AND NO OTHER REPRESENTATIONS OR CLAIMS OF ANY NATURE SHALL BE BINDING ON OR OBLIGATE SIE LLC.

ANY IMPLIED WARRANTIES APPLICABLE TO THIS PRODUCT, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE (1) YEAR PERIOD DESCRIBED ABOVE. IN NO EVENT WILL SIE LLC BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE POSSESSION, USE, OR MALFUNCTION OF THE SIE LLC PRODUCT.

SOME STATES OR PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or province to province. This warranty is valid only in the United States and Canada.

Use and handling

Never disassemble or modify the product or accessories
Use the product and accessories according to the instructions in this manual. No authorization for the analysis or modification of the product, or the analysis and use of its circuit configurations, is provided.

  • Do not use the controllers while charging.
  • The charging station can charge a right and left controller at the same time.

To remove the controller
Lift the controller out of the charging station to remove it. You can still use the controller while the charging adaptor is attached.
Charging time
It takes approximately 1.5 hours to charge the controllers when the battery has no remaining charge.

FOR MORE MANUALS BY SONY, VISIT MANUALSDOCK

FAQS About Sony PlayStation VR2 Sense Controller Charging Station

What is the PlayStation VR2 Sense Controller Charging Station?

The PlayStation VR2 Sense Controller Charging Station is a device designed to charge the controllers used with the PlayStation VR2 system.

How does the Charging Station work?

The Charging Station connects to a power source and allows you to dock your PlayStation VR2 Sense Controllers for charging. It usually uses magnetic connectors to ensure a secure connection.

Do I need to remove any parts of the controllers to charge them?

No, you don’t need to remove any parts of the controllers to charge them. Simply place them in the Charging Station, and they will begin charging automatically.

How many controllers can the Charging Station hold?

The Charging Station typically holds two PlayStation VR2 Sense Controllers at a time.

Does the Charging Station come with the PlayStation VR2 system?

The Charging Station is usually sold separately from the PlayStation VR2 system. It is an optional accessory.

Can I charge other devices with the Charging Station?

No, the Charging Station is specifically designed for charging PlayStation VR2 Sense Controllers and may not be compatible with other devices.

Does the Charging Station have any indicator lights to show the charging status?

Yes, most Charging Stations have indicator lights that show the charging status of each controller. Typically, a solid light indicates that the controller is fully charged, while a blinking light indicates that it is still charging.

How long does it take to fully charge the controllers?

The charging time can vary depending on the remaining battery level of the controllers and the Charging Station’s charging speed. However, it usually takes a few hours to fully charge the controllers.

Can I leave the controllers in the Charging Station when not in use?

Yes, you can leave the controllers in the Charging Station when not in use. This allows you to keep them charged and ready for gaming sessions.

Is the Charging Station compatible with older PlayStation VR controllers?

The Charging Station is specifically designed for the PlayStation VR2 Sense Controllers and may not be compatible with older PlayStation VR controllers. It’s essential to check compatibility before purchasing.

Leave a Comment