Ring Keypad for Ring Alarm Manual

Ring Keypad for Ring Alarm

About Ring
Ring LLC is a manufacturer of home security and smart home devices owned by Amazon. It manufactures a titular line of smart doorbells, home security cameras, and alarm systems.

First, complete the in-app setup.

1. Make sure your Ring Alarm is disarmed.
2. In the Ring app, tap Set Up a Device and find the Keypad in the Security menu.
3. Follow the in-app instructions to complete the setup.

Then, install the device in your home.

1. Choose a convenient location so you can arm and disarm easily as you come and go.
2. You can rest the Keypad on a flat surface or install it on a wall with the bracket and screws provided.
3. The Keypad works plugged in or running on the rechargeable battery. Charge the Keypad using the power adapter and USB cable provided.

Wall Mounting

1. Place the mounting bracket on the wall, then use the wall anchors and screws from your kit to fasten the bracket to the wall (If using anchors, you should pre-drill holes).
2. Slide the Keypad onto the bracket. Screws: 3x 3x21mm. Anchors: 3x 5mm.

If you’re planning to use the Keypad unplugged, you should fully charge it first.

SAFETY AND COMPLIANCE INFORMATION

SAFETY INFORMATION

WARNING! Failure to read and follow these safety instructions before operation could result in fire, electric shock, or other injury or damage.

CAUTION! To reduce the risk of electrical shock, DO NOT open the unit. There are no user-serviceable parts inside the unit. Refer to customer support for any repair.

WATCH FOR SMALL PARTS! Your device and accessories may present a choking hazard to small children. Keep them out of reach of small children. 

Ring Keypad is for indoor use only. Do not expose your device to liquids. If your device or adapter gets wet, carefully unplug the device without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer.

If the device appears damaged, discontinue use immediately. To avoid the risk of electric shock, do not touch your device during a lightning storm. When this device is plugged into an electrical socket outlet, unplugging this device will disconnect it from the AC mains supply. Only plug this device into an easily accessible socket outlet.

BATTERY SAFETY

HANDLE WITH CARE. Your device contains a rechargeable lithium-ion polymer battery and should be replaced only by a qualified service provider. Do not disassemble, open, crush, bend, deform, puncture, shred, or attempt to access the battery in your device. Do not modify or remanufacture the battery, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids, exposure to fire, explosion, or other hazards.

Only use the battery for the system for which it is specified. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Do not short-circuit a battery or allow metallic conductive objects to come into contact with battery terminals. Avoid dropping the device or battery. If the device or battery is dropped, especially on a hard surface, and the user suspects damage, do not attempt repair. Contact Ring Customer Service for assistance.

PRODUCT SPECIFICATIONS

• Model Number: 5B28S8
• Electrical Rating: 5.0V DC 1A
• Adaptor Model: DSA-5PF19-05 050100
• Adaptor made by: Dee Van Enterprise Co., Ltd.
• Temperature Rating: 0°C – 40°C

EU CONFORMITY

Hereby, Ring LLC, declares that the radio equipment Ring Keypad (5B28S8) is in compliance with Directive 2014/53/EU. The full text of the EU Declarations of Conformity is available at the following internet address: ring.com/doc.pdf.

RADIOFREQUENCY COMPLIANCE

In order to protect human health, this device meets the thresholds for exposure of the general public to electromagnetic fields according to Council Recommendation 1999/519/EC. This device should be installed and operated with at least 20 cm between the radiator and your body.

• Wireless Features: Z-Wave
• Maximum Equivalent Isotropically Radiated Power: 868.40 – 869.85 MHz 3.46 dBm EIRP

RECYCLING YOUR DEVICE PROPERLY

In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle, your device in accordance with your local laws and regulations.

FOR ADDITIONAL HELP

• visit: ring.com/help
• or call:
  • UK: +44 1727 26 3045
  • EU: +800 8700 9781

FAQS About Ring Keypad for Ring Alarm

For more manuals by Ring, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Ring-Keypad-for-Ring-Alarm-Manual.pdf” download=”all”]