Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

QFX PBX-126 TWS Bluetooth Portable Speaker User Manual

QFX FEATURED

QFX LOG

QFX PBX-126 TWS Bluetooth Portable Speaker

QFX PBX-126 TWS Bluetooth Portable Speaker

Features

  • Bluetooth
  • True Wireless Stereo
  • FM Radio
  • USB/TF Card Inputs
  • Aux Input
  • Microphone Input
  • Karaoke Function
  • Rechargeable Lithium battery

Specification

  • Output power: 10W
  • Driver unit size: 4 inch
  • Impedance: 3 Ohm
  • S/N ratio: ≥80dB
  • Separation: ≥45dB
  • Distortion: ≤1.0%
  • Frequency response: 100Hz-20KHz
  • Bluetooth version: V4.2+EDR
  • Bluetooth range: 10 meters
  • Bluetooth pairing name BT-126
  • Bluetooth profiles supported: A2DP
  • USB & TF max. memory supported:32 GB
  • FM radio: 87.5-108.0MHz
  • Battery capacity: Built-in 2400mAh
  • Battery type: Lithium-lon
  • Playback time: 80MINS at maximum volume
  • Charging indicator: Yes
  • Charge voltage: DC 5V

Accessory

  • USB Charging Cable
  • Aux Cable 3.5mm
  • User Manual
    Connect to Bluetooth device Bluetooth Pairing: Begin by turning ON the unit. The ON/OFF switch is located on the back panel. Use the mode button “M” to enable Bluetooth. On your mobile device search for “QFX BT-136” under the Bluetooth settings menu and connect. Your mobile device should now be paired with the “BT-136” and ready for music playback. True Wireless Stereo: If you have 2 “QFX BT-136” units with the TWS function, turn on both units and press and hold the MODE button on either unit for a few seconds. The units will connect automatically.
    Note:
    True Wireless Stereo (TWS) function only works in Bluetooth.

QFX PBX-126 TWS Bluetooth Portable Speaker 1

  1. ON/OFF/: Turn ON/OFF the unit.
  2. Microphone Input: 6.35mm jack.
  3. AUX: 3.5mm jack.
  4. USB Input: Insert USB device.
  5. TF Input: Insert TF Card
  6. M: Toggle through BT, AUX, USB, TF, FM Radio. Also the TWS button.
  7. • •Il: Play and Pause the current track. In FM mode, press and hold for auto scan.
  8. 44: Press and hold to decrease the volume. Press for the previous track or FM radio station.
  9. •: Press and hold to increase the volume. Press for the next track or FM radio station.
  10. Press to increase the bass.
  11. Press to change the LED Light mode
  12. DC-5V: USB – DC-5V, 1A min

Bluetooth
Begin by turning ON the unit. The ON/OFF switch is located on the back panel. Use the mode button “M” to enable Bluetooth. On your mobile device search for “QFX BT-136” under the Bluetooth settings menu and connect. Your mobile device should now be paired with the “BT-136” and ready for music playback. Press •|| to Play/Pause, press |4 to return to the previous track, and • to go to the next track.

AUX-IN
Press the MODE Button to enable Aux mode. plug the audio 3.5mm Aux cable into the jack, Press and hold the | and | buttons to decrease and increase the volume.

USB/TF Card
Insert the USB or TF card into the USB/TF port to playback .mp3 music files from the device. Press | to Play/Pause, press| return to the previous track and go to the next track.

FM RADIO
Press the MODE button to enable the FM Radio mode. Press the •|| Button to search FM channels automatically. This operation will scan all  FM stations and Pre-record them to the memory. The scan procedure will take several minutes to complete and should not be interrupted. Once complete, you can short press | or * to move forward or backward. Press and hold the and > buttons to decrease and increase the volume.

Charging
Plug the Micro USB cable into the charging port and connect to a power source (5V, 1A min). The charging LED light indicator should light up red when the unit is charging.

FOR MORE MANUALS BY QFX, VISIT MANUALSDOCK

Faqs About QFX PBX-126 TWS Bluetooth Portable Speaker

What are the main features of the QFX PBX-126 TWS Bluetooth Portable Speaker?

The QFX PBX-126 TWS features Bluetooth connectivity, True Wireless Stereo (TWS) pairing capability, a built-in rechargeable battery, USB/SD card inputs, a built-in FM radio, a microphone input, and LED party lights.

How do I pair the QFX PBX-126 TWS with another speaker for TWS?

To pair two QFX PBX-126 TWS speakers for True Wireless Stereo, turn on both speakers. Press the TWS button on one of the speakers to enter pairing mode. The two speakers should connect automatically, creating a stereo sound experience.

What is the battery life of the QFX PBX-126 TWS?

The battery life of the QFX PBX-126 TWS depends on the volume and usage but typically lasts around 4-6 hours on a full charge.

How do I charge the QFX PBX-126 TWS?

The QFX PBX-126 TWS can be charged using the included charging cable. Plug one end into the charging port of the speaker and the other end into a power source such as a USB wall adapter or a computer.

Can I use the QFX PBX-126 TWS as a wired speaker?

Yes, the QFX PBX-126 TWS has a 3.5mm auxiliary input that allows you to connect it to non-Bluetooth devices using an AUX cable.

What is the range of the Bluetooth connection?

The Bluetooth range for the QFX PBX-126 TWS is typically around 30 feet (10 meters) without obstructions.

Is the QFX PBX-126 TWS water-resistant or waterproof?

The QFX PBX-126 TWS is not specified as water-resistant or waterproof. It’s advisable to keep it away from water and moisture.

How do I reset the QFX PBX-126 TWS speaker?

To reset the speaker, you typically need to turn it off and then on again. If a factory reset is needed, consult the user manual for specific instructions, as procedures may vary.

Can I play music from a USB drive or SD card?

Yes, the QFX PBX-126 TWS has USB and SD card slots, allowing you to play music files directly from these sources.

How do I use the FM radio feature?

To use the FM radio, switch the mode to FM using the mode button. You can then scan for available stations and use the controls to select and play your desired station.

Leave a Comment