Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Pyle PDWR5T Dual Waterproof Outdoor Speaker System User Manual

Pyle FRATURED

Pyle logo

Pyle PDWR5T Dual Waterproof Outdoor Speaker System

Pyle PDWR5T Dual Waterproof Outdoor Speaker System

INDOOR/OUTDOOR SWITCH

Pyle PDWR5T Dual Waterproof Outdoor Speaker System 1

INDOOR/OUTDOOR BASS BOOST SWITCH: 

Audio Experts Have Known For Years That Sound, And Bass Frequencies In Particular, Lose Impact In Outdoor Environments. To Compensate, Many People Will Turn Up The Volume, Overdriving Their System, And Damaging The speaker components. In Response, “PDWR” Speaker Designed A Unique Switch That Increases Bass When In The “OUTDOOR” Position.

At The Same Time, it Protects “PDWR” Speaker from Overdrive Damage In Exterior Applications. The Result Is Dramatically Improved Sound Reproduction, More Reliable Operation, And Longer Life. In The “INDOOR” Position, Performance is Automatically Adjusted To Produce Optimum Results For Use Inside Rooms.

ALL WEATHER DESIGN

The Materials Used In The Manufacture Of “PDWR” Speakers Have Been Carefully Selected ToStand UpTo Extremes Of Temperature (FROM-50 F TO 200F), rain, Snow, Heat, Salt Water, And The Sun UV Rays. “PDWR” Is Ruggedly Constructed With A Combination Of (1)A Low-resonance Mineral-filled Polypropylene Cabinet (2)Brass, Stainless Steel And Aluminum Hardware, And(3)Gold-plated Binding Posts.

CONNECTING YOUR SPEAKE

Pyle PDWR5T Dual Waterproof Outdoor Speaker System 2

The Following Will assist you in connecting the individual speakers to your amplifier or receiver.

  1. First, turn your amplifier off to avoid damage which may result from accidental shorting of the speaker leads
  2. Correct phase polarity is critical for proper stereo imaging and bass performance. the red(+) terminal on your amplifier or receiver must be connected to the red(+) terminal on your speaker,the same applies to the black (-) terminal
  3. Connect one loudspeaker at a time to ensure proper connection of left and right channels, and make sure all wires are firmly fastened
  4. If you notice a great jack of bass/or central image focus, double-check your connections for proper polarity.

EAVE MOUNTING

Pyle PDWR5T Dual Waterproof Outdoor Speaker System 3

MOUNTING THE BRACKET 

  1. Remove The Bracket Knobs And The Bracket From The Speaker
  2. Hold The Bracket to the Mounting Surface.“Plmr” Can Be Mounted Either Horizontally Or Vertically, Hold The Bracket So That The Speaker Wire Fits Through The Large, Circular Wire Hole In The Bracket, and Align The Bracket To Be Square With The Surroundings (Use A Level For Accuracy)
  3. Mark The Locations Of The Three Shaped Screw Holes, Use All Of The Holes
  4. Drill Pilot Holes Into The Mounting Surface
  5. Gently Pull The Speaker Wire Through The Wire Hole In The Center Of The Mounting Bracket, The Bracket So That The Holes All LLine-UpUse Your Hardware To Attach The Bracket To The Mounting Surface.

FINAL ADJUSTMENTS 

  1. After Checking That The Speaker Is in In-phase And Works Correctly, Angle TheSpeaker For The Best Sound
  2. Hand Tighten The Bracket Knobs Only, Power Tools May Over-TightenThe Knob, And Strip The Threads Of The Insert
  3. Check That The Entire Installation Is Safe And Secure.

FEATURES

PDWR33

Excellent For Monitor or Surround Sound Applications

  • 3-1/2” Long Throw Woofer
  • 1/2” Polymer Dome Tweeter
  • 200 Watts Rated Peak Power
  • Frequency Response70Hz-20KHz
  • 8 Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting  bracket included
  • Quick Connect/Disconnect Terminals
  • Dimensions: 5-5/8”(W)x8”(H)x4-7/8”(D)

PDWR3T
Excellent For Monitor or Surround Sound Applications

  • 3-1/2” Long Throw Woofer
  • 1/2” Polymer Dome Tweeter
  • 200 Watts Rated Peak Power
  • Frequency Response70Hz-20KHz
  • 8 Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting bracket included
  • Transformer circuit For Impedance-compatible
  • Quick Connect/Disconnect Terminals
  • Dimensions:5-5/8”(W)x8”(H)x4-7/8”(D)

OVERALL DIMENSIONS

Pyle PDWR5T Dual Waterproof Outdoor Speaker System 4

PDWR53
Excellent For Monitor or Surround

  • Sound Applications
  • 5-1/4” Long Throw Woofer
  • 1/2” Polymer Dome Tweeter
  • 250 Watts Rated Peak Power
  • Frequency Response:85Hz-20KHz
  •  Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting bracket included
  • quick Connect/Disconnect Terminals
  • Dimensions: 7-1/8”(W)x9-7/8”(H)x5-3/4”(D)

PDWR5T
Excellent For Monitor or Surround Sound Applications

  • 5-1/4” Long Throw Woofer
  • 1/2” Polymer Dome Tweeter
  • 250 Watts Rated Peak Power
  • Frequency Response:85Hz-20KHz
  • 8 Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting bracket included
  • Transformer Circuit For Impedance Compatible
  • Quick Connect/Disconnect Terminals
  • Dimensions: 7-1/8”(W)x9-7/8”(H)x5-3/4”(D)

PDWR63
Excellent For Monitor or Surround Sound Applications

  • 6-1/2” Long Throw Woofer
  • 1” Polymer Dome Tweeter
  • 350 Watts Rated Peak Power
  • Frequency Response:50Hz-20KHz
  • 8 Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting bracket included
  • Quick Connect/Disconnect Terminals
  • Dimensions: 9-1/4”(W)x13”(H)x7-3/8”(D)

PDWR6T
Excellent For Monitor or Surround Sound Applications

  • 6-1/2” Long Throw Woofer
  • 1” Polymer Dome Tweeter
  • 350 Watts Rated Peak Power
  • Frequency Response:50Hz-20KHz
  • 8 Ohm Impedance
  • Vented Design for High Power and Deep Bass Response
  • Heavy-Duty Plastic Cabinet
  • Gold Plated Plug Terminals
  • Spring Loaded Mounting bracket included
  • Transformer circuit For Impedance Compatible
  • Quick Connect/Disconnect Terminals
  • Dimensions: 9-1/4”(W)x13”(H)x7-3/8”(D)

FOR MORE MANUALS BY PYLE, VISIT MANUALSDOCK

Faqs About Pyle PDWR5T Dual Waterproof Outdoor Speaker System

Is the Pyle PDWR5T suitable for outdoor use?

Yes, the Pyle PDWR5T speaker system is specifically designed for outdoor use. It is waterproof and weatherproof, making it ideal for use in various outdoor environments.

What is the power rating of the Pyle PDWR5T speakers?

The Pyle PDWR5T speakers have a power rating of 150 watts RMS (Root Mean Square) per speaker, which means they can handle continuous power of up to 150 watts.

Are the Pyle PDWR5T speakers easy to install?

Yes, the Pyle PDWR5T speakers are designed for easy installation. They come with mounting brackets and hardware, making it simple to mount them on walls, ceilings, or other outdoor surfaces.

What is the frequency response of the Pyle PDWR5T speakers?

The frequency response of the Pyle PDWR5T speakers is 60Hz – 20kHz, which means they can reproduce a wide range of frequencies, from deep bass to crisp highs.

Can the Pyle PDWR5T speakers be used in saltwater environments?

Yes, the Pyle PDWR5T speakers are built to withstand exposure to saltwater, making them suitable for use in coastal areas or other environments where saltwater may be present.

Do the Pyle PDWR5T speakers come with a warranty?

Yes, Pyle typically offers a warranty on their products, including the PDWR5T speakers. The length and terms of the warranty may vary, so it’s best to check the warranty information provided by the manufacturer.

Can I connect the Pyle PDWR5T speakers to my existing audio system?

Yes, the Pyle PDWR5T speakers can be connected to most audio systems using speaker wire. They have standard speaker wire terminals for easy connection.

Are the Pyle PDWR5T speakers suitable for use in extreme temperatures?

Yes, the Pyle PDWR5T speakers are designed to operate in a wide range of temperatures, from extreme heat to freezing cold, making them suitable for use in various climates.

What is included in the box when I purchase the Pyle PDWR5T speakers?

Typically, the Pyle PDWR5T speakers come with two speakers, mounting brackets, mounting hardware, and user manual. However, the contents may vary, so it’s a good idea to check the product description or packaging for details.

Can I paint the Pyle PDWR5T speakers to match my outdoor décor?

Yes, the Pyle PDWR5T speakers have a paintable housing, allowing you to customize their appearance to match your outdoor décor. Just be sure to use paint that is suitable for outdoor use and won’t damage the speakers.

Leave a Comment