Pyle PDWR40W Indoor Outdoor Waterproof Speaker System
STALLATION
MOUNTING THE BRACKET
- Remove the bracket knobs and the bracket from the speaker.
- Hold the bracket up to the mounting surface. “PYLE” can be mounted either horizontally or vertically, hold the bracket so that the speaker wire fits through the large, circular wire hole in the bracket, and align the bracket to be square with the surrounding (Use A level for accuracy).
- Mark the locations of the three shaped screw holes, and use all of the holes.
- Drill pilot holes into the mounting surface.
- Gently pull the speaker wire through the wire hole in the center of the mounting bracket, bracket so that the holes all line up.
- Use your hardware to attach the bracket to the mounting surface.
FINAL ADJUSTMENTS
- After checking that the speaker is in phase and works correctly, angle the speaker for the best sound.
- Hand-tighten the bracket knobs only, power tools may over-tighten the knob, and strip the threads of the insert.
- Check that the entire installation is safe and secure.
MOUNTING
PDWR40W/PDWR40B
- Excellent for use on Boats Marinas.Decks.
- Patios.Poolside.Outdoors.Etc.
- Completely Water Proof
- Each PDWR40B Features:
- 5 1/4″ Aluminum Injection Cone Woofer
- 40 OZ.Magnet Structure
- 1″ High Compliance Myiar Tweeter
- Capacitor Crossover Network
- Bass Reflex Vent for Added Bass Response
- Heavy Duty ABS Construction
- Quick Connect/Disconnect Speaker Terminals
- Unique Spring Loaded Mounting System
- Removable Rustproof Mesh Grills
- Pow……………..200 Watts RMS/400 Watts Peak
- Frequency Response…
- .40-22K HZ
- Impedance………
- ……..4 Ohms
- Dimensions.6.25* (W)x9.25″ (H)x5.75* (D)
Connecting your Speakers
Connecting the speakers to your amplifier or receiver.
- First, turn your amplifier off to avoid damage which may result from accidental shorting of the speaker leads.
- Correct phase polarity is critical for proper stereo imaging and bass performance. The red (+) terminal on your amplifier or receiver must be connected to the red (+) terminal on your speaker, the same applies to the black (-) terminal.
- Connect one loudspeaker at a time to ensure proper connection of left and right channels. Make sure all wires are firmly fastened.
- If you notice a high level of bass or central image focus, double-check your connections for proper polarity.
FOR MORE MANUALS BY PYLE, VISIT MANUALSDOCK
Faqs About Pyle PDWR40W Indoor Outdoor Waterproof Speaker System
Is the Pyle PDWR40W suitable for both indoor and outdoor use?
Yes, the Pyle PDWR40W is designed for both indoor and outdoor use, making it versatile for various environments such as patios, decks, poolside, or indoor spaces.
How many speakers come in the package?
The Pyle PDWR40W typically comes in pairs, so you’ll receive two speakers in one package. This allows for stereo sound reproduction.
What is the power rating of these speakers?
The power rating for the Pyle PDWR40W speakers is usually around 200 watts peak power, with RMS power typically around 100 watts.
Are these speakers waterproof?
Yes, the PDWR40W speakers are designed to be waterproof, making them suitable for outdoor use where they might be exposed to rain, splashes, or other moisture.
What is the frequency response range of these speakers?
The frequency response range of the Pyle PDWR40W speakers is typically between 65Hz to 22kHz, providing a balanced audio output across a wide range of frequencies.
Can I mount these speakers on the wall?
Yes, the Pyle PDWR40W speakers come with mounting brackets, allowing for easy installation on walls, ceilings, or other flat surfaces.
Do these speakers come with a warranty?
Pyle often provides a manufacturer’s warranty with their products. The warranty duration may vary, so it’s best to check with the retailer or Pyle directly for warranty details.
What types of audio sources can I connect to these speakers?
The PDWR40W speakers typically feature standard speaker wire connections, allowing you to connect them to a wide range of audio sources such as amplifiers, receivers, or stereo systems.
Are these speakers suitable for use in humid environments?
Yes, the waterproof design of the PDWR40W speakers makes them suitable for use in humid environments, such as bathrooms or indoor pool areas.
What colors are available for the Pyle PDWR40W speakers?
The Pyle PDWR40W speakers typically come in a white color finish, which is neutral and blends well with various indoor and outdoor settings.