HIKMICRO LYNX Pro Series Thermal Monocular User Guide

HIKMICRO LYNX Pro Series Thermal Monocular

Introduction

HIKMICRO LYNX S & LYNX Pro thermal monocular supports hot tracking, video and snapshot, app connection, and so on. The high-sensitivity built-in thermal detector provides you with ca lear view even in total darkness. The monocular is mainly applied to scenarios such as hunting and outdoor nature observation.

Package Content
The package includes Device (× 1), Type-C Cable (× 1), Lint-free Cloth (× 1), Protective Bag (× 1), Wrist Strap (× 1), and Quick Start Guide (× 1).

Appearance
The appearance may vary according to different models. Please take the actual product for reference.

1. Lens Cover: Protects the lens from dust or scratch.
2. Focus Ring: Adjusts focus to obtain clear targets.
3. Buttons: To set functions and parameters.
4. Diopter Adjustment Knob: Adjusts the dioptric setting.
5. Eyepiece: The piece is placed closest to the eye to view the target.
6. Charging Indicator: Indicates the charging status of the device.
7. Type-C Interface: Power the device or transmit data with a type-C cable.
8. Tripod Mount: Mounts the tripod.
9. Wrist Strap Hole: Mounts the wrist strap.

Button Description

Steps:

1. Lift the type-C interface cover.
2. Connect the device and power adapter with a type-C cable to charge the device.
3. Check the charging indicator status: Flashing Red & Green: Error occurred. | Solid Red: Charging. | Solid Green: Fully charged.

Note

• The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).
• Charge the device for more than 5 hours before first use.
• The built-in battery type is 18650, and the battery size should be 24 mm × 72 mm. The rated voltage and capacity are 3.635 VDC/3350 mAh.

App Connection 

• Firmware Upgrade
• Browse and Download
• Remote Control
• Preview
• HIKMICRO Academy
• Online Service

Steps:

1. Scan the QR code to download and install the app.
2. Select in the device menu to enable hotspot.
3. Turn on the WLAN of your phone and connect to the device hotspot.
4. Hotspot Name: HIKMICRO_Serial No.
5. Hotspot Password: Serial No.
6. Open the app and connect your phone to the device. You can view the device interface on your phone.

More Operations

Scan the QR code below to obtain the user manual for more operations.

FOR MORE MANUALS BY HIKMICRO, VISIT MANUALSDOCK