Fiodio F-510 Waterproof Portable Speakers
About Fiodio
Product Specifications
- Bluetooth Version: V5.0
- Output Power: 5W*2 (RMS)
- Driver Size: 3 inches 45 10W*2
- S/N Ratio: ≥ 70dB
- Size: 298*102*168.8mm
- Water Resistant Level: IPX5
Pack Contents:
- Wireless Speaker x 1
- Instruction Manual x 1
- USB Charging Cable × 1
Charging the Speaker
Before using the speaker for the first time, charge it for at least two hours.
- Plug the USB cable into the port on the speaker, and plug the other end into the USB port on a computer / AC USB power adaptor.
- A red LED will turn on to indicate that the unit is charging.
- The red LED will turn off when fully charged.
Power ON/OFF
- Long press ” % ” to turn on the Bluetooth speaker, and the machine prompts” POWER ON”
- The prompt sounds and enters the Bluetooth mode
- Long press ” % ” again to turn off the Bluetooth speaker. The machine prompts “POWER OFF”
Pairing the Speaker
- Place the speaker near the Bluetooth-enabled device.
- Long press the Power button to start the Bluetooth speaker, the speaker prompt sounds, and the speaker is now in pairing mode.
- Follow the instructions on your device to search for the speaker.
- The speaker is called “FIODIO F-510”, enter the PIN ‘0000’ if needed.
- When the connection is successful, there will be a voice prompt.
- Once the speaker is on, it will try to pay with the last connected device, if the connection fails speaker enters pairing mode.
- To re-enter Bluetooth pairing mode if already connected to a device, press and hold the play/pause button for three seconds.
Bluetooth operating instructions:
- After the Bluetooth connection is successful, press “%” to play music, and press again to pause the music
- Press the ” I” to decrease the volume, and long press for the previous song.
- Press the ” ¾” to increase volume, and long press for the next song.
AUX operating instructions:
- Power ON, insert the 3.5mm audio cable into the AUX port, and automatically switch to AUX. You can also press the “M” to switch to AUX mode to play music, and voice prompt AUX status.
- Press the “” to decrease volume.
- Press the “%’ to increase volume.
- Press the ” to play/pause music.
USB operating instructions:
- Turn on the speaker, insert the USB flash drive into the USB port, and automatically switch to USB. You can also press the “M” to switch to USB mode to play music, and voice prompt USB status
- Press the “M” to decrease volume, and long press for the previous song.
- Press the “%” to increase volume, and long press for the next song.
- Press the “>” to play/pause music.
FAQs About Fiodio F-510 Waterproof Portable Speakers
What Bluetooth speakers are water resistant?
The Anker Soundcore 2 is rather portable and light, and because it’s waterproof, it can be used almost everywhere that’s practical—in the shower or bathtub, outside in the rain, etc. Impressively, the battery lasts for 24 hours.
Why are JBL speakers so expensive?
It goes without saying that more costly JBL models have a few more features than their more affordable counterparts. Generally speaking, the greater the battery, the longer it will last between charges, and the possibility of charging your phone or tablet right from the speaker itself.
Is JBL or Bose better?
JBL speakers are renowned for their “loud” and “bass-heavy” sound, with significant releases including the JBL Boombox 2 and JBL Xtreme 2 made especially for outdoor speaker buyers. Bose, on the other hand, excels at producing home theater and audio speakers that provide listeners with a cinematic experience.
What speaker has the highest waterproof rating?
The highest IP certification for outdoor speakers is typically IP67. This provides protection from total immersion for up to 30 minutes at 1 meter-deep levels.
JBL Salt is water resistant.
It can be buried for 30 minutes at a one-meter depth, but not in chlorine or salt water.
Which speaker has the most power?
It produces high-output sound at 165 decibels and 30,000 watts for combat applications, rocket launch simulators, and airport noise-cancellation projects. Technically speaking, it is an electro-pneumatic noise modulator.
What level of Bluetooth quality is best?
For better sound, switch to aptX if your device supports it. These are typically the highest quality codecs supported by Bluetooth speakers, yet this is also uncommon, with the majority of Bluetooth speakers only supporting AAC and SBC as the best quality codecs.
What power output does a good Bluetooth speaker have?
In conclusion, your intended use and environment will determine the best wattage for a Bluetooth speaker.
Is Bluetooth sound of great quality?
Bluetooth uses SBC (low complexity subband coding) compression to ‘fit’ your music through the technology’s hypothetical “thin pipes,” which again reduces the amount of detail that can be heard in your music. True music fans won’t enjoy this at all.
Is JBL superior to Sony?
Sony has more options when it comes to Bluetooth speakers that look well in a place, but JBL may be a better option for those searching for a robust speaker that can be brought outside or used for outdoor gatherings.
For more manuals by Fiodio Manuals Dock
[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/09/Fiodio-F-510-Waterproof-Portable-Speakers.pdf” download=”all”]