Edifier TWS200 Plus Earphone Instructions Guide

Edifier TWS200 Plus Earphone

About Edifier
Edifier specializes in creating high-end audio products that are both technologically advanced and beautifully crafted. Edifier, a company with its headquarters in Beijing, China, was founded in 1996 and offers a variety of home audio, professional audio, vehicle audio, headphones, and microphones for both personal entertainment and business use. In February 2010, Edifier joined the Chinese stock exchange and became the first company listed in the Chinese audio market. In 2010, Edifier was considered the sole Chinese corporation implementing a national trademark strategy.

Specifications

• Bluetooth Version V5.2
• Bluetooth Protocol A2DP、AVRCP、HFP、HSP
• Audio Decoding apt Adaptive、apt、AAC、SBC
• Effective Distance 10m
• Playback Time ab. 6hrs (Earbuds) + 18hrs (Charging case)
• Input DC 5V 100mA(Earbuds)；DC 5V 1A(Charging case)
• Frequency Response 20Hz-20KHz
• SPL 94±3dBSPL(A)
• Impedance 28Ω
• Brand Edifier

Introduction

Lower power consumption, faster transmission, and a greater number of wireless connections are provided to the user by the recently updated Bluetooth V5.2 chipset, significantly enhancing their music experience.

Product Description and accessories

Note Images are for illustrative purposes only and may differ from the actual product.

User guide

Charge the earbuds

• You may hear a warning tone when at a low battery level, please place the earbuds in the case for charging.

Charge the charging case

• If the power indicator flashes six times rapidly when the case is opened, it indicates the case has a low battery capacity, please charge it in time.
• Power indicator steady lit = charging Power indicator off = fully charged

Battery level indicator on the charging case 

• When the charging case is opened/closed, the power indicator will show the case’s battery level; V if flashes three times slowly: full battery level; if flashes twice slowly: medium battery level; if flashes once slowly: low battery level; if flashes six times rapidly: battery level is less than 10%
• Power indicator (next to the charging port)

• Input: 5V 35mA(earbuds)
• 5V 1A(charging case)

Warning

The rechargeable batteries that provide power for this product must be disposed of properly for recycling. Do not dispose of batteries in fire to prevent an explosion.

• Power on when the case is opened.
• Power on when the case is opened.
• White light is lit for 1 second.

Pairing

• Place the earbuds in the case, and double-click the pairing button to enter Bluetooth pairing.
• Bluetooth pairing: red and white lights flash rapidly.
• When not connected with any Bluetooth device, place the earbuds in the case, press and hold the pairing button for around 10 seconds, and release until the white light flashes rapidly, so as to enter TWS pairing mode and clear pairing records.
• TWS pairing: white light flashes rapidly When successful, white light is lit for 1 second and then the red and white lights flash rapidly.

Search for and connect to “EDIFIER TWS200 Plus”, after pairing is successful, the white light of the charging case will flash twice per 5 seconds.

Functional operation

• Accept/end a call Double-click the left or right earbud
• Pause/play Double-click the left or right earbud
• Previous track Triple-click the left earbud
• Next track Triple-click the right earbud

Note Images are for illustrative purposes only and may differ from the actual product.

Maintenance

• Do not use a fast charger to charge the product to avoid affecting the service life of the battery.
• If not used for long periods of time, please charge the product with a lithium battery every three months.
• Keep the product away from humid places to avoid affecting internal circuits. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to cause damage.
• Do not put the product in places exposed to the sun or with high temperatures. The high temperature will shorten the service life of electronic components, damage batteries, and make plastic components deformed.
• Do not put the product in cold places to avoid damaging the internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, and strike the product with a hard object to avoid damaging the internal circuit.
• Do not use drastic chemicals or cleaners to clean the product.
• Do not use sharp objects to scratch the product surface to avoid damaging the shell and affecting facade.

Model EDF200018

Edifier International Limited P.O. Box 6264 General Post Office Hong Kong www.edifier.com 2020 Edifier International Limited. All rights reserved. Printed in China

NOTICE

For the need for technical improvement and system upgrade, the information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown in this manual may be slightly different from the actual product. If any difference is found, the actual product prevails.

FAQs Edifier TWS200 Plus Earphone

For more manuals by EDIFIER, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Edifier-TWS200-Plus-Earphone_compressed.pdf” download=”all”]