Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

DS18 NXL-10SUB Hydro Marine Subwoofer Owner Manual

DS18 NXL-10SUB Hydro Marine Subwoofer featured

DS18 LOGO

DS18 NXL-10SUB Hydro Marine Subwoofer

DS18 NXL-10SUB Hydro Marine Subwoofer

FEATURES

  • 10″ Subwoofer for Marine & Motorsports
  • Continuous Power Handling 300W RMS
  • Peak Music Power 600W MAX
  • Sensitivity: 89dB at 1W/1M
  • Nominal Impedance: 4 Ohm
  • IP65 Marine Grade Compliant Specifications, 100% UV Stable
  • Motor Structure Use Y35 Ferrite Main Magnet
  • Injection Molded Polypropylene Cone with UV Protection and Butyl Surround
  • Grill with Injection Molded Composite with 316 Stainless Steel mesh
  • Integrated RGB LED Lighting
  • LED Controller with Smartphone App Available. For Multi-Function RGB LED Lighting option (Sold Separately)

PACKAGE INCLUDES

  • 1 X 10” Subwoofer for Marine & Motorsport
  • 1 X 1.5M #18 Speaker Input Wires With Fast Terminal
  • 1 X 1.5M #22 RGB LED Power Input Wires With Fast Terminal
  • 6 X M5.2 Philips Inner Hex Head 304 Stainless Screw (4mm Hex Tool)
  • 1 X Owner’s Manual

READ BEFORE INSTALLATION

  1. Be sure to carefully read and understand the instructions before installing these speakers.
  2. For safety, disconnect the negative battery terminal from the battery before beginning the installation.
  3. For easier assembly, we suggest you run all wires before mounting the speakers in place.
  4. Use high-quality connectors for a reliable installation and to minimize signal or power loss.
  5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines, or electrical wiring when working on any vehicle. If installation is in a boat, take care not to cut or drill through the main hull.
  6. Never run wires underneath the vehicle. Running the wires inside the vehicle or hull area provides the best protection.
  7. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

INSTALLATION

  1. Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Ensure the mounting location is deep enough for the speaker to fit; only mount to a flat surface. Use extra caution when mounting on panels with urethane foam.
  2. Refer to the specification chart to determine the proper diameter hole to cut for your speakers.
  3. Mark the locations for the mounting screws. Drill the holes with a 0.157” bit.
  4. Feed the speaker wires through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a”+”.
  5. Fit the speaker and mount it into place using six (6) screws.
  6. Tighten the screws until the speaker is snug in place
  7. LED CONNECTIONS: There are two options to choose from:

WIRING

  1. lf you have an LED Control Module (LED-BTC), Connect as shown in the following diagram:
  2. DS18 NXL-10SUB Hydro Marine Subwoofer 1 To connect without the LED Control Module (LED-BTC), Connect as Shown in the Following Diagram:

DS18 NXL-10SUB Hydro Marine Subwoofer 2

  1. Green Color: “G” Fast Terminal Connect to Battery Negative
  2. Red Color: “R’ Fast Terminal Connect to Battery Negative
  3. Blue Color: “B” Fast Terminal Connect to Battery Negative
  4. Purple Color: “R” And “B” Fast Terminal Connect to Battery Negative
  5. Yellow Color: “R’ And “G’ Fast Terminal Connect to Battery Negative
  6. Cyan Color: “B” And “G” Fast Terminal Connect to Battery Negative
  7. While Color: “R’ And ‘B’ And “G’ Fast Terminal Connect to Battery Negative

SPECIFICATIONS

GENERAL SPECIFICATIONS 

  • Nominal Diameter ………………………………………………………………………………………………..10″ / 254mm
  • Nominal Impedance  ……………………………………………………………………………………………………. 4 Ohm
  • RMS Power Handling  …………………………………………………………………………………………… 300W
  • MAX Power Handling ……………………………………………………………………………………………. 600W
  • Sensitivity (1w/1m) …………………………………………………………………………………………………….. 89dB
  • Frequency Response……………………………………………………………………………………….35-250Hz
  • Recommended Low Pass Crossover ……………………………………………….. 100Hz

BODY – FEATURES 

  • UV Compliant  ……………………………………………………………………..Yes, 100% Stable
  • Marine Grade Type ………………………………………………………………………………………………………. IP65
  • RGB LED………………………………………………………………………………………………………………Yes, RGB integrated
  • Grill Type ……………………………………………Injection Molded Composite with 316 Stainless Steel mesh
  • Sold as Single ……………………………………………………………………………………………………….Yes

WOOFER SPECIFICATIONS

  • Voice Coil Diameter……………………………………………………………………………… 2″ / 50.8mm
  • Voice Coil Former Material ………………………………………Glass Fiber
  • Winding Material ………………………………………………………………………………………………………..CCAW
  • Cone Material  ……………………………………………….. Injection Molded Polypropylene + UV-compliant
  • Surround Material ……………………………………………………………………… Butyl (Rubber) / Goma
  • Basket Material ………….High Temp Injection Molded Composite with UV Protection coating
  • Magnet Material …………………………………………………………………………………………………Ferrite
  • Magnet Weight………………………………………………………………………………………………………………………. 72 oz

THIELE & SMALL PARAMETERS

  • Equivalent Volume ………………………………Vas …………………………………………………26.7L / 0.94ft3
  • Excursion (one way) ……………………………………..Xmax …………………………………………………………… 13mm
  • Free Air Resonance  ………………………….Fs …………………………………………………………………..45Hz
  • Mechanical Factor  ………………………………………Qms……………………………………………………………….8.919
  • Electrical Factor  ……………………………………………Qes ………………………………………………………………..0.805
  • Total Factor ……………………………………………………….Qts…………………………………………………………………0.457
  • Moving Mass ……………………………………….Mms………………………………………………………….73.229g
  • Compliance ………………………………………Cms ……………………………………………………0.171 mm/N
  • Bl Factor  …………………………………………………………………Bl …. ……………………………………………………………….9.68
  • Voice Coil Inductance ………………. Le…………………………………………………………..1.8418mH
  • Diaphragm Area  ……………………………………..Sd ………………………………………………………. 333.29 Cm3
  • DC Resistance  ………………………………………………..Re … ………………………………………………………..3.65 ohm
  • Efficiency Bandwidth Product ………………………………EBP………………………………………………………………….55.9

RECOMMENDED ENCLOSURES

  • Sealed Internal Volume ……………………………………………………………………………………….0.6~2ft3
  • Sealed Box Output Response ………. F3 …………………………………………………….64~45Hz
  • Free Air or Baffle Mount  …………………………….. Yes recommended

MEASUREMENT 

  • Overall Diameter ………………………………………………………………………………………………… 10.76″ / 273.3mm
  • Overall Depth………………………………………………………………………………………………………6.73″ / 171mm
  • Front Mount Baffle Cutout ………………………………………………………………….8.78″ / 223mm
  • Mounting Depth  …………………………………………………………………………………………. 5″ / 127.5mm
  • Motor Diameter…………………………………………………………………………………………………5.51″ / 140mm

COLOR AVAILABLE 

  • Black Satin …………………………………………………………………………………………………………….. NXL-10SUB/BK
  • White Gloss…………………………………………………………………………………………………………..NXL-10SUB/WH
  • Carbo Fiber Texture Gloss ……………………………………………………………… CF-1OSUB

MEASUREMENTS

DS18 NXL-10SUB Hydro Marine Subwoofer 3

DS18 NXL-10SUB Hydro Marine Subwoofer 4

WARRANTY

Should your NXL-10SUB or CF-10SUB require service please consult with the dealer from which it was purchased, or contact DS18 local dealer. Please do not attempt to return your subwoofer directly to us without first calling for a Return Authorization Number. Units received without an accompanying Return Authorization Number will be processed more slowly. Additionally, you must include a copy of your purchase receipt from an authorized dealer for consideration of in-warranty service; otherwise, repair charges will apply. Units received without a receipt will be held for 30 days, allowing us time to contact you and obtain a copy of the receipt. After 30 days, all units will be returned.

For more Manuals by DS18, visit MANUALSDOCK

FAQS About DS18 NXL-10SUB Hydro Marine Subwoofer

What is the power handling of the DS18 NXL-10SUB Hydro Marine Subwoofer?

The DS18 NXL-10SUB Hydro Marine Subwoofer has a peak power handling of 600 watts and an RMS power handling of 300 watts.

What is the size of the DS18 NXL-10SUB Hydro Marine Subwoofer?

This subwoofer has a diameter of 10 inches, making it compact and suitable for various marine applications.

Is the DS18 NXL-10SUB Hydro Marine Subwoofer waterproof?

Yes, the DS18 NXL-10SUB Hydro Marine Subwoofer is designed to be waterproof and weather-resistant, making it suitable for use in marine environments.

What kind of enclosure does the DS18 NXL-10SUB Hydro Marine Subwoofer require?

The DS18 NXL-10SUB Hydro Marine Subwoofer is designed to work well in both sealed and ported enclosures, giving you flexibility in installation options.

Does the DS18 NXL-10SUB Hydro Marine Subwoofer come with mounting hardware?

Yes, the DS18 NXL-10SUB Hydro Marine Subwoofer typically comes with mounting hardware, making it easy to install in various locations on your boat or marine vessel.

What is the impedance of the DS18 NXL-10SUB Hydro Marine Subwoofer?

The DS18 NXL-10SUB Hydro Marine Subwoofer has a nominal impedance of 4 ohms, making it compatible with a wide range of amplifiers.

What is the frequency response of the DS18 NXL-10SUB Hydro Marine Subwoofer?

The DS18 NXL-10SUB Hydro Marine Subwoofer has a frequency response range of 30Hz to 500Hz, allowing it to produce deep, powerful bass tones.

Does the DS18 NXL-10SUB Hydro Marine Subwoofer come with a warranty?

Yes, DS18 typically offers a warranty on their products, including the NXL-10SUB Hydro Marine Subwoofer. Be sure to check the specific terms and conditions of the warranty when purchasing.

Can the DS18 NXL-10SUB Hydro Marine Subwoofer be used in other vehicles besides boats?

While it’s specifically designed for marine use, the DS18 NXL-10SUB Hydro Marine Subwoofer can also be used in other vehicles like off-road vehicles, ATVs, or any other outdoor application where weather resistance is needed.

Is the DS18 NXL-10SUB Hydro Marine Subwoofer compatible with all audio systems?

The DS18 NXL-10SUB Hydro Marine Subwoofer is compatible with most audio systems that can power a 10-inch subwoofer. However, it’s always a good idea to check the specifications and compatibility of your audio system before making a purchase.

Leave a Comment