Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers Owner Manual

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers featured

DS18 LOGO

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers

SPECIFICATIONS

GENERAL SPECIFICATIONS

  • Nominal Size  …………………………………………………………………………………4″ / 101.6mm
  • Total Watts (Peak)  ……………………………………………………………………………… 240W
  • RMS Power @ 4 ohm (Internal Amp) …………………………….2 x 40 W @ 14.4V
  • MAX Power @ 4 ohm (Internal Amp) ……………………………2 x 120 W @ 14.4V
  • Frequency Response ………………………………………………………………60Hz – 20 KHz

BODY/FEATURES 

  • Enclosure Material ……………………..Injection PC+ABS
  • Marine Grade Type……………………………….. IPX5 + UV Stable
  • RGB Led Type  …………………………………………………………………………………………..No
  • Grill Type …………………………………………………….. Injection PC+ABS
  • Pair / Par ……………………………………………………………………………………………………………………………. Yes
  • Clamp  …………………………………………………….. Tube Type Fixed with pads for 1-1/2″to 2″
  • Front Logo/ Logo Frontal…………………………………………………………………………………………………….. Yes
  • Finish ……………………………………………………………………………………Matte Black

WOOFER SPECIFICATIONS 

  • Voice Coil Diameter  ………………………………………………….1″ / 25.4mm
  • Voice Coil Former Material ……………………………………………….. KSV
  • Winding Material …………………………………………………………………………….. PEPSV
  • Cone Material………………..Injection Molded Polypropylene + UV-compliant
  • Surround Material n ……………………………………………..Butyl (Rubber)
  • Basket Material …………………………………. Steel with Salt Protection Coating
  • Magnet Material ………………………………………………………………………. Ferrite
  • Magnet Weight ………………………………………………………………………………………………11 oz
  • Magnet Diameter  ………………………………………………………………………3.14″ / 80mm

TWEETER SPECIFICATIONS 

  • Voice Coil Diameter……………………………………………………1″ / 25mm
  • Voice Coil Former Material …………………………………………………. ASV
  • Winding Material ………………………………………………………………………………. CCAW
  • Type ………………………………………………………………………………………………………………..Dome
  • Diaphragm Material …………………………………………………………………………… PEI
  • Magnet Material…………………………………………………………..Neodymium
  • Magnet Weight……………………………………………………………………………………………….. 45g
  • Crossover………………………………………………………………………………………………………………………….. 6dB/Oct

AMPLIFIER SPECIFICATIONS 

  • Amplifier Class  ………………………. Stereo Full Range
  • Amplifier Type ……………………………………………………………………… Digital
  • Number of Channels  ………………………………………………….. 2 Channels
  • Minimum Impedance  ………………………………………………………………………… 4 Ohms
  • Signal to Noise Ratio ………………………………………………………………………. 127 dB
  • Audio Source ……………… BT Audio Streaming V5
  • Power Input Wire Size  ……………………………….. 16 Ga
  • Fuse Size  …………………………………………………………………………………………… 15 Amp Wire Remote Control Input ……………………………………………….. Yes, Compatible with DS18 MXRC
  • Thermal Protection ………………………………………………. Yes (>75°C / 167°C)
  • Over-Load Protection  ……………………………………………………………….. Yes
  • Short Circuit Output Protection  …………………………………… Yes
  • Voltage Input Protection ……………………………… Yes (<9.2V / > 18V)

MEASUREMENT

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 1

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 2

SPEAKER MEASUREMENT

  • Overall Diameter  …………………………………………………………………………..5.51″ / 140 mm
  • Overall Depth  …………………………………………………………………………..8.07″ / 205 mm
  • Overall Height  ………………………………………………………………… 7.28″ / 185 mm with clamp

PACKAGE

PACKAGING INCLUDES
After you have unpacked the speaker system, check all the contents of the package so it contains all of the items below. If something is missing, please call us.

  • (2) MP4TPBT speakers
  • (2) Mounting clamps (Pre-Installed on speakers)
  • (4) M6 x 15mm bolts (Pre-Installed)
  • (6) Rubber clamp adapters (1/8” thickness)

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 3

INSTALLATION

  1. Unpack and disassemble the clamps from the speaker. Make sure you account for all hardware when removing it from the clamps. There are lock washers that must be re-installed on the clamp.
  2. Determine the location of the speaker.
  3. Determine the correct rubber clamp adapters that are needed for your application.
  4. The rubber adapters will need to be cut to length, so they fit the enclosure and clamp.
  5. After the rubber clamp has been cut, remove the white protective layer and stick it to the clamp and enclosure.
  6. Place the speaker on the tower and have the top clamp ready to place on top.
  7. Screw the two bolts evenly, until snug. Once the position is verified, tighten the bolts to another half-turn. DO NOT OVERTIGHTEN.
  8. The speaker accepts up to 16 GA wires, it is recommended you use a high-quality marine-grade speaker cable for your installation.

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 4

WIRING

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 5

  1. Main Speaker pod with the Built-in Amplifier (Left Side).
  2. Wired Remote Control Input for MXRC (sold Separately).
  3. 3.5mm Jack Extension wire for MXRC (included with MXRC).
  4. Backlight Extension wire for MXRC (included with MXRC).
  5. MXRC Remote Control (Sold separately).
  6. The remote control backlight output (Red 22ga) connects this to the MXRC remote control.
  7. Right Speaker Output Wire (Black/Gray 20ga) Connect this to the right passive speaker pod, black is negative (-), and gray is positive (+).
  8. Passive speaker pod (Right Side).
  9. RCA Audio Output, this can be used to add a subwoofer or speaker Amplifier.
  10. Battery power wire with fuse holder (Yellow 16ga) connects this directly to +12V power source (battery) Fuse size: 15A.
  11. Accessory +12V switched (Red 22ga) connect this to turn the MP4TPBT on or off to avoid draining your battery when not in use.
  12. RemoteTurn-on output (Blue22ga) connects this to turn on or off an external amplifier.
  13. Ground or Negative wire (Black 16ga) connects this to a metal chassis or directly to the negative post of the battery.

OPERATION CONTROLS

First steps
Once everything is connected and the accessory cable is powered, the device will turn on or use the power button (1) on the remote control. When the unit is turned on, it will be in “Paring” mode to be searched from your BT mobile device. Go to the BT devices menu and press “SCAN”, once the device “MP4TPBT” appears in the list, select it to make the connection. If “MP4TPBT” is not seen, repeat the above steps to “refresh” the BT devices list. When the device is paired, a confirmation voice should play through the speakers, so you be ready to play your audio files and control the volume on your mobile device.

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 6

REMOTE CONTROL MXRC OPERATION

  1. Long Press the (POWER/SRC) Button until the MP4TPBT Turns On or Off
  2. press the (VOL+) Button to raise the volume or you can also use the volume control on your connected device. To lower the volume, press the (VOL-) button or use your device’s controls.
  3. Use the (NEXT) Button to select the next track or song on your playlist. Use the (PREVIOUS) Button once to restart the song that is playing or press it again to go back to the previous song in your playlist.
  4. Use this (PLAY/PAUSE) button to Play or Pause the music from your device.
  5. This Button (PRESETS) has no function for MP4TPBT.

TROUBLESHOOTING

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 7

DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers 8

WARRANTY

If your MP4TPBT requires service please consult with the dealer from which it was purchased, or contact DS18 Audio’s local Dealer. Do not attempt to return your amplifier directly to us without first calling for a Return Authorization Number. Units received without an accompanying Return Authorization Number will be processed more slowly. Additionally, you must include a copy of your purchase receipt from an authorized dealer for consideration of in-warranty service; otherwise, repair charges will apply. Units received without a receipt will be held for 30 days, allowing us time to contact you and obtain a copy of the receipt. After 30 days, all units will be returned without repair.

For more Manuals by DS18, visit MANUALSDOCK

FAQS About DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers

What is the DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers?

The DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers are high-quality marine-grade speakers designed to be mounted on wakeboard towers. They are amplified speakers, meaning they have built-in amplifiers to enhance sound output.

What makes these speakers suitable for marine use?

These speakers are specifically designed to withstand harsh marine environments, including exposure to water, salt, and UV rays. They are built with corrosion-resistant materials and feature a waterproof design to ensure durability and longevity.

What is the power output of these speakers?

The power output of the DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers can vary depending on the specific model and configuration. However, they typically have a high power output to deliver clear and loud sound even in noisy marine environments.

Are these speakers compatible with Bluetooth devices?

Yes, these speakers are equipped with Bluetooth connectivity, allowing you to wirelessly stream music from your Bluetooth-enabled devices such as smartphones, tablets, or laptops.

Can these speakers be controlled remotely?

Yes, many models of the DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers come with remote control capabilities, allowing you to adjust volume, track selection, and other settings from a distance.

What is the installation process for these speakers?

The installation process for these speakers typically involves mounting them onto the wakeboard tower of your boat using the included mounting hardware. You may need to make electrical connections to power the speakers and connect them to your audio source.

Do these speakers come with a warranty?

Yes, DS18 typically offers a warranty on their products to cover any manufacturing defects or malfunctions. The length and terms of the warranty may vary, so it’s important to check the warranty information provided by the manufacturer.

Can these speakers be used in other outdoor applications besides marine use?

While these speakers are specifically designed for marine use, they can also be used in other outdoor applications where durability and weather resistance are important, such as on ATVs, golf carts, or in outdoor entertainment areas.

Do these speakers come with built-in LED lights?

Some models of the DS18 MP4TPBT Marine Wakeboard Tower Amplified Speakers come with built-in LED lights, which can add visual appeal to your boat or outdoor setup, especially during nighttime use.

Are these speakers available in different colors or finishes?

Yes, these speakers are often available in a variety of colors and finishes to match your boat’s aesthetics or personal preferences. Common options include black, white, chrome, or custom paint finishes.

Leave a Comment