Welcome to ManualsDock! Read Millions of manuals for free.

Get 20% off and boost your website's speed with Hostinger Cloud Hosting!

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat User Manual

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat featured

Carrier LOGO

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat

INTRODUCTION

CONGRATULATIONS! Your decision to choose the InfinityR Touch Control puts you in a select group of homeowners who understand the value of precise comfort control and appreciate the simplicity of an easy–to–use, intuitive, control. Your new Infinity Touch Control offers high-quality comfort technology. Please take a few moments to read through this manual carefully. Next set up a comfort profile and schedule that makes sense for your lifestyle; then relax and enjoy the new comfort of your home!

HOME SCREEN

Information Displayed
The information displayed on the home screen will appear when there has been no interaction with the Infinity Touch Control for at least two minutes. The basic information displayed on the Home Screen consists of the current date and time, the room temperature (zone temperature if applicable), the outdoor temperature (if applicable), and current weather conditions (Wi–Fi® models only, when properly configured). Connectivity status to the home Wi-Fi network and the MyInfinity Server will also be displayed on the Home Screen for compatible Wi-Fi units (SYSTXCCITW01–A and SYSTXCCITC01–A). Note: You must have Wi-Fi enabled for the indicator to appear. If you have uploaded a photo to the control (see Pg. 41), it will be displayed until you touch the display. You will then be taken to the Home Screen.

Wi-Fi Connectivity Status

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 1

With the SYSTXCCITW01–A and SYSTXCCITC01–A Infinity Touch Wi–Fi® models, connectivity status to the home Wi-Fi network and MyInfinity Server is displayed in the top right-hand corner of the Home Screen. When the Infinity Touch control is connected to the home Wi-Fi network and the MyInfinity Server, the signal strength bars will be displayed in white as depicted in the image above. Connection strength to the home Wi-Fi network will be indicated by the number of solid white bars displayed.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 2

  • Pressing on the Connectivity Status bars from the Home Screen will allow you to view the Remote Access Status screen.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 3

NOTE
If the Infinity Touch control is not connected to the home network, a red “X” will appear over the strength bars. If the Infinity Touch control is connected to the home Wi-Fi network but loses connection to the MyInfinity Server, a triangle will appear over the strength bars as depicted in the image below. Connection strength to the home Wi-Fi network will continue to be displayed by the number of solid bars. If this problem persists, please contact 1–800–Carrier for assistance.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 4

  • Pressing on the Connectivity Status bars from the Home Screen will allow you to view the Remote Access Status screen.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 5

Information Buttons
On the bottom of some screens will be an information icon. By pressing the information icon, a text box will display to show what interactions are available on that particular screen. To close the text box, touch the text box.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 6

MAIN SCREEN

The main screen is where most interactions will take place. Touch anywhere on the Home screen to arrive at the main screen.

System Mode

  • Once in the main screen,
  • To access your system mode touch the MODE label located in the upper right of the control.
  • The drop-down menu will allow you to choose between AUTO, HEAT, COOL, FAN ONLY, and OFF, depending on the equipment installed in your system.
  • If OFF is selected your system will not control temperatures, humidity, or fan.
  • If AUTO is selected, the Infinity Touch Control automatically switches between heating and cooling to maintain your comfort during transitional seasons.

NOTE
AUTO mode is intended to switch between heating and cooling modes based on temperature demand. A gradual auto transition is an energy-conscious default that will satisfy the majority of customers. Some customers might have significant and simultaneous heating and cooling demands in different zones. To address this need, a special simultaneous heating and cooling demand auto mode could be enabled by the Installer.

When the feature is enabled and AUTO mode is selected, the simultaneous heating and cooling demand auto mode will alternate between heating and cooling, depending on demand, every half hour. This may result in higher energy usage but provide the benefit of greater comfort. Your installing contractor can enable this feature if desired. (This feature is only available with zoned systems).

  • If HEAT is selected then the Infinity Touch Control operates only the heating system.
  • If COOL is selected then the Infinity Touch Control operates only the cooling system.
  • If FAN ONLY is selected, then the Infinity Touch Control operates the indoor fan but heating, cooling, humidification or dehumidification will not take place.

Set Day and Time

  • To set the day and time for your home screen enter the main screen by touching anywhere on the control.
  • Touch the DAY and TIME label located at the top middle of the screen or access by going through the menu screen (see Pg. 32).
  • To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the feature you wish to change.
  • Use the Up (Y) and Down (B) buttons to make the appropriate changes.
  • When you have completed all of the settings, touch SAVE.
  • If you make a mistake you may touch CANCEL and begin again.

Adjust Temperature (Temporary Hold)
The Infinity Touch Control allows you to temporarily override your programmed schedule by adjusting the indoor temperature at any time to meet your needs.

Adjusting Comfort Profiles

  • To adjust the comfort activity, enter the main screen by touching anywhere on the control.
  • Touch the activity/top button under the Touch ’N’ Go® feature on the left side of the screen; then select the desired activity of HOME, AWAY, SLEEP, or WAKE.
  • Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired temperature in 15-minute increments.
  • When the correct time interval is displayed, touch DONE.
  • To return to the scheduled program, touch HOLD UNTIL and select PER SCHEDULE.

Adjusting Heating

  • To adjust the heating temperature, enter the main screen by touching anywhere on the control.
  • With the system in either AUTO or HEAT mode, use the Up (Y) and Down (B) buttons to set the desired temperature.
  • On the left-hand side of the screen, the comfort profile will switch to manual, and the system will be placed on a temporary hold.
  • Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired temperature in 15-minute increments.
  • When the correct time interval is displayed, touch DONE.
  • To return to the scheduled program, touch HOLD UNTIL and select PER SCHEDULE.

Adjusting Cooling

  • To adjust the cooling temperature, enter the main screen by touching anywhere on the control.
  • With the system in either AUTO or COOL mode, use the Up (Y) and Down (B) buttons to set the desired temperature.
  • On the left-hand side of the screen, the comfort profile will switch to manual, and the system will be placed on a temporary hold.
  • Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired temperature in 15-minute increments.
  • When the correct time interval is displayed, touch DONE.
  • To return to the scheduled program, touch HOLD UNTIL and select PER SCHEDULE.

Adjust Temperature (Permanent Hold)
The Infinity Touch Control allows you to permanently override your programmed schedule by adjusting the indoor temperature at any time to meet your needs.

Adjusting Comfort Profiles

  • To adjust the comfort activity, enter the main screen by touching anywhere on the control.
  • Touch the activity under the Touch ’N’ Go® feature on the left side of the screen; then select the desired activity of HOME, AWAY, SLEEP, or WAKE.
  • Touch the HOLD UNTIL button, then touch HOLD.
  • To return to the scheduled program touch HOLD, and then touch PER SCHEDULE.

Adjusting Heating

  • To adjust the heating temperature, enter the main screen by touching anywhere on the control.
  • With the system in either AUTO or HEAT mode, use the Up (Y) and Down (B) buttons to set the desired temperature.
  • On the left-hand side of the screen, the comfort profile will switch to MANUAL.
  • Touch the HOLD UNTIL button, then touch HOLD.
  • To return to the scheduled program, touch HOLD, and then touch PER SCHEDULE.

Adjusting Cooling

  • To adjust the cooling temperature, enter the main screen by touching anywhere on the control.
  • With the system in either AUTO or COOL mode, use the Up (Y) and Down (B) buttons to set the desired temperature.
  • On the left-hand side of the screen, the comfort profile will switch to MANUAL.
  • Touch the HOLD UNTIL button, then touch HOLD.
  • To return to the scheduled program, touch HOLD, and then touch PER SCHEDULE.
  • For added convenience in a multi-zone application, the Touch ’N’ Go® feature will also allow you to select the desired activity of HOME or AWAY for ALL ZONES.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 7

  • Once you have selected the desired activity for ALL ZONES, you will have the option to either permanently (HOLD) or temporarily (HOLD UNTIL) override your programmed schedule.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 8

  • The HOLD option will permanently override your programmed schedule until you CANCEL ALL ZONES.
  • Selecting the HOLD UNTIL option will allow you to temporarily override your programmed schedule.
  • Once selected, use the Up (Y) and Down (B) buttons to change the time in 15-minute increments.
  • When the correct time interval is displayed, touch DONE.

FEATURES

Adjust Fan Speed
The Features function of Infinity Touch Control allows you to adjust the fan speed during continuous fan operation.

  • To adjust the fan speed, enter the main screen by touching anywhere on the control.
  • Touch FEATURES on the top left of the screen.
  • A drop-down menu will appear. Touch FAN selection.
  • Use the Up (Y) and Down (B) buttons to set the fan to AUTO, LOW, MEDIUM, or HIGH, then touch SAVE. In zoned systems, the activity settings will apply to the selected zone only.
  • For zoned systems, the selected fan speed will apply to the zone currently displayed in the HOME and MAIN.

View Current Humidity Level
The Features function of Infinity Touch Control allows you to view the current humidity level within the conditioned space.

  • Enter the main screen by touching anywhere on the control.
  • Touch FEATURES on the top left of the screen.
  • In the drop-down menu, you will see your measured humidity levels within the conditioned space.

MENU SCREEN

Your menu screen offers more features and control for your Infinity Touch Control. Touch the menu button at the bottom right of the main screen.

COMFORT PROFILES
You will need to set the comfort profiles before you attempt to program your new Infinity Touch Control.

  • The COMFORT PROFILES button includes settings for Temperature and Fan Profiles, Humidity and Fresh Air Profiles, as well as Window Protection Setup.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 9

  • Set your desired heating and cooling temperatures and your fan setting using the TEMPERATURE AND FAN PROFILES for each activity. In zoned systems, the activity settings will apply to the selected zone only.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 10

  • For example to change your HOME comfort profile, touch the HOME icon.
  • Use the Up (Y) and Down (B) buttons to change the fan settings, and heating and cooling temperatures. When you are done, press the DONE button on the bottom right.
  • Do the same thing to change the WAKE and SLEEP profiles.
  • The AWAY profile provides an extra feature called Advanced Smart Setback. It allows the Infinity System to dynamically determine the away temperature automatically to save the most amount of money, yet reach your comfort settings when you return home. Advanced Smart Setback may control the temperature somewhere in between the Away temperature limits. This is normal and is intended to prevent excessive energy use.
  • Use the Up (Y) and Down (B) buttons to change the fan settings and temperature settings. The temperature settings are the range in which you choose to keep your home conditioned while you are away. The Advanced Smart Setback function will maintain your temperature within this range.
  • Set your desired humidity and fresh air (if applicable) using the HUMIDITY AND FRESH AIR PROFILES for each activity

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 11

Home Comfort Profile Humidity Control

  • Touch WHEN AT HOME to set your humidity settings while the home is occupied to enjoy superior comfort.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 12

  • If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level within the home.
  • You will have the option to turn ON or OFF your humidifier from this screen.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 13

  • Once your Humidifier is turned ON, use the Up (Y) and Down (B) buttons to set the desired humidity level between 5–45%.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • Next, select your desired humidity level during cooling by touching COOLING HUMIDITY.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 14

  • Use the Up (Y) and Down (B) buttons to set the desired dehumidification level between 46–58%.
  • Touch YES or NO for the system to over-cool the conditioned space by up to 3º F to remove as much humidity from the air as possible. The system will not over-cool past 70F.
  • Press SAVE when finished, or CANCEL to discard any changes.

Home Comfort Profile Fresh Air Control

  • If a ventilator is installed in your home, select the amount of fresh air to circulate during heating mode by touching Heating Fresh Air.

NOTE
This option may not be available with the ERVXXNVA ventilator due to its simplified control design.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 15

  • You will have the option of choosing among AUTO, MANUAL, or OFF.

NOTE
This option may not be available with the ERVXXNVA ventilator due to its simplified control design.

  • The AUTO setting will allow the user to choose the maximum fresh air that the ventilator will provide. Selections are Low, Medium, or High. In Auto, the ventilator will run continuously, unless the outdoor temperature approaches 0F or 100F. At those temperatures, it will turn off.
  • The MANUAL setting allows you to select the percentage of fresh air to supply your home. In the MANUAL mode, there are several selections available: Off, Low 25%, Low 50%, Low 75%, Low 100%, Medium, and High. The percent values are the percent of an hour.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • If applicable, next select the amount of fresh air to circulate during cooling mode by touching COOLING FRESH AIR. Again, you will have the option of choosing between AUTO, MANUAL, and OFF.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.

Away Comfort Profile Humidity Control
You may wish to have different humidity settings when you’re away. Press the Menu area on the Main Screen to access the additional menu selections. Select Comfort Profiles, then select Humidity and Fresh Air Profiles option.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 16

  • Touch AWAY to set your humidity settings while you are away from home to save the most amount of energy.
  • If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level when you are away from home.
  • Use the Up (Y) and Down (B) buttons to set the minimum humidity level between 5%–45%.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • To set the desired humidity level during cooling, touch COOLING HUMIDITY.
  • Use the Up (Y) and Down (B) buttons to set the maximum dehumidification level at NONE or between 55–65%.
  • Touch YES or NO for the system to over-cool the conditioned space by up to 3_ F to remove as much humidity from the air as possible.
  • Press SAVE when finished, or CANCEL to discard any changes.

Away Comfort Profile Fresh Air Control
You may wish to have different Fresh Air profiles for when you’re away. Press the menu area on the Main Screen to access the additional menu selections. Select Comfort Profiles, then select Humidity and Fresh Air Profiles option.

  • Touch AWAY to set your fresh air settings while you are away from home.
  • If a ventilator is installed in your home, select the amount of fresh air to circulate during heating mode by touching HEATING FRESH AIR.

NOTE
This option may not be available with the ERVXXNVA ventilator due to its simplified control design.

  • You will have the option of choosing between AUTO, MANUAL, or OFF.
  • The AUTO setting will allow the system to choose the fresh air setting in a range of Low, Medium, or High, as selected by you.
  • The MANUAL setting allows you to select the percentage of fresh air to supply to your home. In the MANUAL mode, there are several selections available: Off, Low 25%, Low 50%, Low 75%, Low 100%, Medium, and High. The percent values are the percent of an hour.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • If applicable, select the amount of fresh air to circulate during cooling mode by touching COOLING FRESH AIR. Again, you will have the option of choosing between AUTO, MANUAL, and OFF.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.

Vacation Comfort Profile Humidity Control
You may wish to have different humidity settings when you’re on Vacation. Press the Menu area on the Main Screen to access the additional menu selections. Select Comfort Profiles, then select Humidity and Fresh Air Profiles option.

  • Touch VACATION to set your humidity settings while you are on vacation to save the most amount of energy.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 17

  • If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level when you are away from home.
  • Use the Up (Y) and Down (B) buttons to set the minimum humidity level between 5%–45%.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • To set the desired humidity level during cooling, touch COOLING HUMIDITY.
    d Use the Up (Y) and Down (B) buttons to set the maximum dehumidification level at NONE or between 55–65%.
  • Touch YES or NO for the system to over-cool the conditioned space by up to 3_ F to remove as much humidity from the air as possible.
  • Press SAVE when finished, or CANCEL to discard any changes.

Vacation Comfort Profile Fresh Air Control

  • If a ventilator is installed in your home, select the amount of fresh air to circulate during heating mode by touching HEATING FRESH AIR.
  • You will have the option of choosing between AUTO, MANUAL, or OFF.
  • The AUTO setting will allow the user to choose the maximum fresh air that the ventilator will provide. Selections are Low, Medium, or High.
  • The MANUAL setting allows you to select the percentage of fresh air to supply to your home.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.
  • If applicable, select the amount of fresh air to circulate during cooling mode by touching COOLING FRESH AIR. Again, you will have the option of choosing between AUTO, MANUAL, and OFF.
  • Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level.
  • Press SAVE when finished, or CANCEL to discard any changes.

DISPLAY

The following display preferences can be adjusted for Infinity Touch Control, Temperature Units (°F or °C), Backlight Levels, Sound Settings, and Screen Saver Settings.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 18

Temperature Units
Select the desired temperature units, either °F for Fahrenheit or °C for Celsius, and touch SAVE. Temperatures will be displayed with a half-degree resolution for Celsius or a full-degree resolution for Fahrenheit.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 19

Backlight Levels

  • Backlight levels are programmable for each Comfort Profile setting HOME, AWAY, WAKE, or SLEEP.
  • Use the Up (Y) and Down (B) buttons to set/change the brightness of the backlighting.
  • Brightness levels include OFF or 1–10.

NOTE
After 30 seconds of inactivity on the touch screen, the backlight level will be set back to the current selected level which may be OFF.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 20

Sound Settings
To allow a buzzer to sound on each touch of the screen, touch ENABLE; otherwise, touch DISABLE. The “tick” sound that occurs when you touch the screen cannot be disabled.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 21


Screen Saver Settings
To allow a photo to act as a screen saver, touch ENABLE; otherwise, touch DISABLE.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 22

Touch Screen Calibration
If you experience any problems with touch position accuracy, Touch Screen Calibration can be performed by following the on-screen prompts.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 23

SCREEN LOCK

The screen may be locked by selecting the SCREEN LOCK icon from the menu screen.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 24

  • A message will pop up asking if you want to proceed with the screen lock. Selecting Yes will lock the screen and take you back to the home screen.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 25

  • To unlock the screen, press and hold UNLOCK in the bottom left-hand corner for 10 seconds.

Carrier SYSTXCCITC01 Infinity Touch Control Thermostat 26

  • The screen will change and the control will then be accessible. If the screen is to be locked again, return to the menu, select the screen lock, and touch YES.

For more Manuals by Carrier, visit ManualsDock

FAQS About Carrier SYSTXCCITC01 Infinity Touch Control Thermostat

What is the Carrier SYSTXCCITC01 Infinity Touch Control Thermostat?

The Carrier SYSTXCCITC01 Infinity Touch Control Thermostat is a cutting-edge thermostat designed to provide precise control over your HVAC system. It offers advanced features for optimizing comfort and energy efficiency in your home.

What are some key features of the Infinity Touch Control Thermostat?

This thermostat boasts features like Wi-Fi connectivity for remote access, intuitive touchscreen interface, zoning capabilities, humidity control, and advanced programming options for personalized comfort settings.

How does the Wi-Fi connectivity benefit users?

Wi-Fi connectivity allows users to control their HVAC system remotely using a smartphone or computer. This feature enables convenient adjustments to temperature settings and programming from anywhere with an internet connection.

Can the Infinity Touch Control Thermostat integrate with other smart home systems?

Yes, it is compatible with various smart home platforms, including Amazon Alexa and Google Assistant, enabling seamless integration into smart home ecosystems for enhanced convenience and automation.

What is zoning, and how does it work with this thermostat?

Zoning allows users to divide their home into different temperature zones, each controlled independently. The Infinity Touch Control Thermostat supports zoning, enabling customized temperature control for different areas of the house based on occupancy and comfort preferences.

How does the thermostat manage humidity levels?

This thermostat includes humidity control features to help maintain optimal indoor humidity levels for comfort and air quality. Users can set desired humidity levels, and the thermostat adjusts operation accordingly.

Is the touchscreen interface user-friendly?

Yes, the thermostat features an intuitive touchscreen interface that makes it easy to navigate settings, adjust temperatures, and program schedules. The interface provides clear, accessible controls for users of all ages.

Can users create customized schedules with the thermostat?

Absolutely, the Infinity Touch Control Thermostat offers advanced programming options, allowing users to create personalized schedules to align with their daily routines. This feature helps optimize energy usage while ensuring comfort when needed.

Is professional installation required for the thermostat?

While professional installation is recommended to ensure proper setup and compatibility with your HVAC system, the thermostat comes with detailed installation instructions for qualified DIY enthusiasts.

What type of warranty does Carrier offer for the Infinity Touch Control Thermostat?

Carrier typically provides a limited warranty for their thermostats, covering defects in materials and workmanship for a specified period. Warranty details may vary, so it’s advisable to consult the product documentation or contact Carrier directly for specific warranty information.

Leave a Comment