Audio-Technica ATH-A990Z Dynamic Headphones Instruction Manual

Table of Contents

Audio-Technica ATH-A990Z Dynamic Headphones

Audio-Technica is a well-known Japanese audio equipment manufacturer that specializes in the design and production of high-quality audio products. The company was founded in 1962 by Hideo Matsushita and is headquartered in Tokyo, Japan. Since its inception, Audio-Technica has gained a strong reputation in the audio industry for its commitment to innovation, craftsmanship, and technical expertise.

The company’s product range includes a wide variety of audio equipment, such as headphones, microphones, turntables, wireless systems, and other audio accessories. They cater to various markets, including professional audio, broadcast, live sound, studio recording, and consumer audio.

Thank you for purchasing these headphones. Before using these headphones, please read through these operating instructions to ensure that you will use the headphones correctly. Also, please keep it in a location that is read any time soon.

Instructions

Caution!

Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
Do not use the headphones in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites).
To prevent damage to your hearing, do not raise the volume too high. Listening to loud sounds for an extended period may cause temporary or permanent hearing loss.
Discontinue use if skin irritation results from direct contact with the product.
Do not disassemble, modify, or attempt to repair the headphones.
Be careful to avoid pinching yourself between the housing and the arm of the product.
Please do not use the headphones without the wing supports as this could cause injury.
To ensure compatibility and correct usage, always consult the user manual of any device before connecting the headphones to it.
Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using this product.
On public transport systems or in other public places, keep the volume low so as not to disturb other people.
Please minimize the volume on your audio device before connecting the headphones in order to avoid hearing damage from sudden exposure to excessive volume.
When using this product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by a headphone malfunction.
Because this product uses metal, it can become cold.
Do not subject the headphones to strong impact.
Do not store the headphones under direct sunlight, near heating devices, or in a hot, humid, or dusty place. Do not allow the headphones to get wet.
When this product is used for a long time, the headphones may become discolored due to ultraviolet light (especially direct sunlight) or wear.
Please do not expose the headphones to excessive stress or pressure, which could result in damage or deformation.
Connect/disconnect the cable by holding the plug. Pulling directly on the cable can result in a broken wire and the risk of electric shock.
Do not wrap the cable around a rack, furniture, or other object. Do not allow the cable to be pinched.
Be sure to purchase the appropriate conversion plug adaptor when connecting the headphones to equipment other than a 3.5 mm/6.3 mm stereo headphone jack.
Lengthening the headphone cable requires a separate extension cable available from your dealer.
For information about replacing headband pads or other parts, or for information about other serviceable parts, contact your Audio-Technica dealer or service center.

Name of each part

Please confirm each part before using these headphones.

Headband
LEFT/RIGHT
Housing
Earpad
3.0 m cable
6.3/3.5 mm gold-plated stereo 2-way plug
Cable bushing for plug
Joint
Cable bushing for the main unit. Wing support parts
Head top base
Head pad
Wing arm

Using headphones

Minimize the volume of each sound device, then connect the headphones to the headphone terminal.
Please make sure to position the earpads correctly (LEFT/RIGHT position and with the earpad covering the whole ear).
Turn on your audio device, and adjust the volume as necessary.

*Please also read the instruction manual of the audio device.

Specifications

Driver: Closed-back dynamic 53 mm
Output Sound Pressure Level: 100 dB/mW
Frequency Response: 5 to 42,000 Hz
Maximum Input Power: 2,000 mW
Impedance: 44 ohms
Weight: 335 g (without cable)
Cable Length: 3.0 m
Plug 6.3/3.5 mm gold-plated stereo 2-way plug Sold separately: Earpads
(For product improvement, this product is subject to modification without notice.)

FAQS About Audio-Technica ATH-A990Z Dynamic Headphones

What’s the verdict on Audio-Technica headphones?

A well-known company with headphones at more reasonable prices is Audio-Technica.

What makes Audio-Technica so great?

Their goods are well-made and have excellent sound.

Audio-Technica is water resistant.

Although the earphones are not IP certified, Audio-Technica claims that they are splashproof to a level comparable to IPX4.

Are drivers required for Audio-Technica headphones?

No specific Audio-Technica drivers are needed for their USB audio products.

What nation’s trademark is Audio-Technica?

Hideo Matsushita started Audio-Technica on April 17, 1962, in Japan.

Where are headphones created by Audio-Technica?

The following details are printed directly on the box’s back: 2206 Naruse, Machida, Tokyo, Japan 194-8666 Audio-Technical Corp. Japan provided the design and engineering. produced in China.

What is the quality of Audio Technica headphones?

A well-known company with headphones at more reasonable prices is Audio-Technica.

High dynamic headphones: what are they?

Wide frequency response and the capacity to generate powerful, rich bass tones are two features that distinguish dynamic headphones.

What is the sound’s dynamic range?

Dynamic range in music production refers to the contrast between the loudest and quietest sounds.

How wide a dynamic range can it get?

The theoretical maximum dynamic range of most digital cameras, which use a 10 to 14-bit A/D converter, is 10 to 14 stops.

For more manuals by Audio-Technica, Visit Manualsdock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/08/Audio-Technica-ATH-A990Z-Dynamic-Headphones-Instruction-Manual_compressed.pdf” download=”all”]